Modifying Butt End of Cue

[Side-Pocket]

Has anyone ever modified the butt end of a cue to accept a screw in extension? I have been wanting to get a 4" extension for my PureX cues but some only have a butt plug without any threads in the butt end.

I was thinking there might be a way to get a tool that can cut thresds in the butt, but the opening for the bumper plug seems too large to cut threads without making the wall too thin. I know there are threaded inserts that can go in some of the popular cue brands, but I haven't seen any for PureX cues.

I am willing to modify the butt end to accomodate the extension, although I don.t know what is the best way to go about it. Hopefully someone out there has been able to solve this prooblem and can give me some constructive advice on how to modify the cue or where to purchase an insert, plug and 4" extension for PureX cues.

Thanks for any help you can offer.

 

[SSDiver2112]

First details on the butt's construction will determine what and if something can be done.

Existing weight bolts can also be an issue, but in general a plug of wood or phenolic is added to be able to thread for the extension bumper.

Phenolic for regular bumper, but same idea.

 

[blokid]

IMO, not modify butt end is best. I always do make own screw to adapt my cue extension. Nowadays, most of custom cue makers depends on making cue extension for their custom cue using extension kit (screw bumper, and pin male) from China. Even they have to change their original design methodology of making cue to adapt cue extension. Sure they will have to calculate balance point if they could, but most of them not achieve success.
If you're willing to modify, just bore the butt, do plug and do thread. Plug it with hard material for long lasting.
Just my 2 cents

 

[skor]

The question is, is it worth the cost of the customization on a cheap cue?
might as well upgrade the cue to one that already have an extension system.

 

[Bob Jewett]

... Thanks for any help you can offer.

You could try a slip-on extension to see if you like it. Some slip-ons fit pretty well.

 

[chuckpilegis]

Maybe something like this if you have no access to a lathe

 

[dendweller]

You could try a slip-on extension to see if you like it. Some slip-ons fit pretty well.

The X10R Slip-On gets really good reviews. Watched a vid on it, you modify the diameter by putting in 3 velcro strips in it.
They have it at PoolDawg for 39 bucks currently.
I've played a guy a lot who has one from Amazon that you tighten on the cue, looks like a real hassle every time he uses it.