I am getting ready to move and unfortunately there will only be a few bars close with bar boxes (which I hate), I would have to travel an hour or so to get to some big tables. So I am thinning out my stuff because I am not going to have the time I used to have to enjoy our great sport. Items are for sale or trade (full or partials, but not the JP's). I am looking for a high end or custom 1x2 or 2x2 case and a high end full splice cue (not looking to buy these items at this time, just trade).
(All shaft measurements are taken 1" below the ferrule, all weights reflect no weight bolt)
Cues
1. Steve Klein full splice butt only. Cocobolo into straight grain maple.
15.60oz and 29" with a 3/8x10 joint pin and black phenolic collars. White butt cap with ring. A few finish dings and you can feel the white ring at the butt cap. Plays nice with my Predator shaft(not included)...$150.00 Sold
2. Mike Erwin Sneaky Pete Like Cue. Looks like a Rosewood into BEM.
The points are inlays. 29.25" butt and a 29.50" shaft at 13mm with a layered tip. Cue weight is 19.80oz with a 5/16x14 Piloted collarless joint. Slight taper roll on shaft, maybe a credit card thick...$150.00 Sold
3. Paul Sumrall (Son of Thunder on AZ) Set, Player and Jump/Break.
Would prefer to sell / trade these together.
Player: All white is Ivory except the ringwork (Micarta) Ebony on Ebony 4 pt. with 4 veneers, Yellow/Orance/Black/Red. Butt is 15.20oz and 29.0" abd has a radial pin. There is some finish lift around one of the ovals in the butt sleeve, I believe Paul will refinish the butt sleeve since the cue is less than a year old.
Paul's shaft with his conical taper is 29.0" and 13mm with Ivory ferrule and Kamui M/S tip weighing in at 4.20oz. The Predator shaft is 30" and 3.70oz and 12.75mm also with the M/S Kamui....$550.00 Soldor $700.00 with the predator shaft.
Jump/Break: Cue is all ebony with a brown streak on one side for personality with ringwork to match the player. Quick release jump joint and a Radial pin at the main joint (material is Ivory substitute). Butt weighs 14.80 and is 29.0" long. The shaft is a monster purple heart at 29.0" and 4.60oz with a 13.40mm diameter......$300.00 Sold
(both of these cues have some discoloration at th ebottom of the butt cap, most likely from the cases, and there may be some very slight abraision there also)
Cases
Justis 3x6 2009. Case has extra pocket, extra scrolling, brass band, and shoulder pad. Has some pocket damage, and I will post some better pictures on just that area.....$700.00+ case....$500.00 firm TRADED (unless you have a trade I want!)
Chaz Dillon Case.....maybe the only one you'll ever see....
Has JB's 3x6 interior, nice tooling and is very light weight.
Pockets are a big 8" and 16".....$275.00 SOLD
JP's
Left to right, top to bottom.
1. Light brownish Amboyna Burl 3/8x10..$17.50 Sold Dan
2. Redish Amboya Burl 3/8x10....$22.50
3. Ebony with Amoyna Burl tops 3/8x10...$25.00
4. Maple with Ebony tops 3/8x10...$22.50 Sold Run of One
5. Cocobolo Radial.....$17.50
6. Ebony with redish Cocobolo tops? Radial (came form a cue maker on AZ, butt section does not line up perfect with shaft section)....$15.00 Sold Dan
7. Ebony with Ivory Shamrock inlays 3/8x10....$35.00 SOLD mtorre14
8. Amboyna Burl Radial pin shaft section...$5.00
9. 5/16x14 piloted...looks like ebony with some veneers....$2.50 Sold Mamono
10. Scruggs 5/16x14 Butt section (delrinish) $15.00 Sold Mamono
11. McDaniel 5/16x14 shaft section (delrinish) $10.00
(All shaft measurements are taken 1" below the ferrule, all weights reflect no weight bolt)
Cues
1. Steve Klein full splice butt only. Cocobolo into straight grain maple.
15.60oz and 29" with a 3/8x10 joint pin and black phenolic collars. White butt cap with ring. A few finish dings and you can feel the white ring at the butt cap. Plays nice with my Predator shaft(not included)...$150.00 Sold
2. Mike Erwin Sneaky Pete Like Cue. Looks like a Rosewood into BEM.
The points are inlays. 29.25" butt and a 29.50" shaft at 13mm with a layered tip. Cue weight is 19.80oz with a 5/16x14 Piloted collarless joint. Slight taper roll on shaft, maybe a credit card thick...$150.00 Sold
3. Paul Sumrall (Son of Thunder on AZ) Set, Player and Jump/Break.
Would prefer to sell / trade these together.
Player: All white is Ivory except the ringwork (Micarta) Ebony on Ebony 4 pt. with 4 veneers, Yellow/Orance/Black/Red. Butt is 15.20oz and 29.0" abd has a radial pin. There is some finish lift around one of the ovals in the butt sleeve, I believe Paul will refinish the butt sleeve since the cue is less than a year old.
Paul's shaft with his conical taper is 29.0" and 13mm with Ivory ferrule and Kamui M/S tip weighing in at 4.20oz. The Predator shaft is 30" and 3.70oz and 12.75mm also with the M/S Kamui....$550.00 Soldor $700.00 with the predator shaft.
Jump/Break: Cue is all ebony with a brown streak on one side for personality with ringwork to match the player. Quick release jump joint and a Radial pin at the main joint (material is Ivory substitute). Butt weighs 14.80 and is 29.0" long. The shaft is a monster purple heart at 29.0" and 4.60oz with a 13.40mm diameter......$300.00 Sold
(both of these cues have some discoloration at th ebottom of the butt cap, most likely from the cases, and there may be some very slight abraision there also)
Cases
Justis 3x6 2009. Case has extra pocket, extra scrolling, brass band, and shoulder pad. Has some pocket damage, and I will post some better pictures on just that area.....$700.00+ case....$500.00 firm TRADED (unless you have a trade I want!)
Chaz Dillon Case.....maybe the only one you'll ever see....
Has JB's 3x6 interior, nice tooling and is very light weight.
Pockets are a big 8" and 16".....$275.00 SOLD
JP's
Left to right, top to bottom.
1. Light brownish Amboyna Burl 3/8x10..$17.50 Sold Dan
2. Redish Amboya Burl 3/8x10....$22.50
3. Ebony with Amoyna Burl tops 3/8x10...$25.00
4. Maple with Ebony tops 3/8x10...$22.50 Sold Run of One
5. Cocobolo Radial.....$17.50
6. Ebony with redish Cocobolo tops? Radial (came form a cue maker on AZ, butt section does not line up perfect with shaft section)....$15.00 Sold Dan
7. Ebony with Ivory Shamrock inlays 3/8x10....$35.00 SOLD mtorre14
8. Amboyna Burl Radial pin shaft section...$5.00
9. 5/16x14 piloted...looks like ebony with some veneers....$2.50 Sold Mamono
10. Scruggs 5/16x14 Butt section (delrinish) $15.00 Sold Mamono
11. McDaniel 5/16x14 shaft section (delrinish) $10.00
Last edited:
.
