Samsara Cues of Rugby, ND create cue masterpieces that sell for tens of thousands of dollars.
That said, because of their state of the art facility and the capabilities of Dave Doucette and Jim Stadum they can also create limited numbers of great playing cues for affordable prices.
Every cue that comes out of their shop is handmade, one at a time with the same attention to detail and superior internal construction techniques regardless of cost.
All cues with points are full cut 'V' bottomed for structural integrity.
Cues are fully cored using only the best pieces of core wood (they throw away more core blanks then shaft blanks).
The proprietary triple tenon 'A' joint, made from parts machined to a tolerance level achieved by very few cuemakers, ensure a cue with structural strength and integrity for many years into the future and a cue that is a pleasure to play with, both in sound and feel.
The intarsia designs, unique to Samsara, are not inlays they are intricate concoctions of many pieces of exotic hard woods laminated together in geometric patterns that achieve their unique appearance after being turned round.
A small and often overlooked detail of Samsara cues is their diamond pattern decor rings, another Samsara proprietary technique.
Leather wraps are standard on all Samsara cues with a wrap.
Hardwood joint protectors are included.
Below is pictured the 12 designs of the latest limited edition, this series of designs will be produced in very small quantities for a year or so and then be replaced by the next installment of designs.
These cues and the rest of the Samsara lineup can be seen and purchased from Barracudacue.com

That said, because of their state of the art facility and the capabilities of Dave Doucette and Jim Stadum they can also create limited numbers of great playing cues for affordable prices.
Every cue that comes out of their shop is handmade, one at a time with the same attention to detail and superior internal construction techniques regardless of cost.
All cues with points are full cut 'V' bottomed for structural integrity.
Cues are fully cored using only the best pieces of core wood (they throw away more core blanks then shaft blanks).
The proprietary triple tenon 'A' joint, made from parts machined to a tolerance level achieved by very few cuemakers, ensure a cue with structural strength and integrity for many years into the future and a cue that is a pleasure to play with, both in sound and feel.
The intarsia designs, unique to Samsara, are not inlays they are intricate concoctions of many pieces of exotic hard woods laminated together in geometric patterns that achieve their unique appearance after being turned round.
A small and often overlooked detail of Samsara cues is their diamond pattern decor rings, another Samsara proprietary technique.
Leather wraps are standard on all Samsara cues with a wrap.
Hardwood joint protectors are included.
Below is pictured the 12 designs of the latest limited edition, this series of designs will be produced in very small quantities for a year or so and then be replaced by the next installment of designs.
These cues and the rest of the Samsara lineup can be seen and purchased from Barracudacue.com
