#1 Todd Schaller oak Titlist conversion
Around 19.5 oz, 3/8x10 pin, 13mm shaft
Cue has a roll. Looks like a slight lift in the joint. Never bothered me. Shaft has a taper roll. I'm going to try to include a video of me rolling this cue if I can't get it uploaded here I can email it to you. A few dings here and there nothing through the clear coat. Some chipping in clear coat on the bottom right above the bumper $500
#2 old Adam cue
Not certain of weight. Guessing around 18-19.
Cue rolls straight. Very slight taper roll in shaft. 5/16x18 flat faced. Few dings
$Sold
#3 3/8x10 Predator Z2
Shaft has been tapered down pretty small. I'm guessing 11mm or smaller. I am including a picture of the shaft tip compared to a standard z2. very slight taper roll. $Sold/COLOR]
#4 Radial Pin Predator Z2
Standard 11.75. Ki-tech medium tip. Some blueing on the shaft. 1 very small ding you can feel 4-5" from the tip. Some chipping in the clear coat on the thin black ring. Very slight taper roll.
$Sold
#5 30" 11.75 3/8x10 CDX Supershaft
Very little use. Unsure of tip. Very slight taper roll.
$Sold
Prices are shipped. Can also bundle the Titlist with one of the 3/8x10 LD shafts. More pictures available upon request.
Around 19.5 oz, 3/8x10 pin, 13mm shaft
Cue has a roll. Looks like a slight lift in the joint. Never bothered me. Shaft has a taper roll. I'm going to try to include a video of me rolling this cue if I can't get it uploaded here I can email it to you. A few dings here and there nothing through the clear coat. Some chipping in clear coat on the bottom right above the bumper $500
#2 old Adam cue
Not certain of weight. Guessing around 18-19.
Cue rolls straight. Very slight taper roll in shaft. 5/16x18 flat faced. Few dings
$Sold
#3 3/8x10 Predator Z2
Shaft has been tapered down pretty small. I'm guessing 11mm or smaller. I am including a picture of the shaft tip compared to a standard z2. very slight taper roll. $Sold/COLOR]
#4 Radial Pin Predator Z2
Standard 11.75. Ki-tech medium tip. Some blueing on the shaft. 1 very small ding you can feel 4-5" from the tip. Some chipping in the clear coat on the thin black ring. Very slight taper roll.
$Sold
#5 30" 11.75 3/8x10 CDX Supershaft
Very little use. Unsure of tip. Very slight taper roll.
$Sold
Prices are shipped. Can also bundle the Titlist with one of the 3/8x10 LD shafts. More pictures available upon request.
Attachments
Last edited: