One more question about Schon cue weight bolts

[Shooter1]

There are a number of places I can buy three different bolts all appearing to be aluminum, they are weighted as follows; .20 oz, .80 oz and 1.2 oz.
On the Schon site they have three bolts as well but they are noted by length, not weight, the shortest one is aluminum 1.5" long, the next one appears to be steel at 1.5" long and the last one is 2.50" long but no weights on any of them are noted.
I suspect the aluminum one is about .25 oz. Does anyone know the weight of the other two steel bolts?

Thanks

 

[garczar]

There are a number of places I can buy three different bolts all appearing to be aluminum, they are weighted as follows; .20 oz, .80 oz and 1.2 oz.
On the Schon site they have three bolts as well but they are noted by length, not weight, the shortest one is aluminum 1.5" long, the next one appears to be steel at 1.5" long and the last one is 2.50" long but no weights on any of them are noted.
I suspect the aluminum one is about .25 oz. Does anyone know the weight of the other two steel bolts?

Thanks

IIRC they're .25oz, 1oz and 1.5oz.

 

[garczar]

Schon Weight Bolt

i was pretty close.

 

[muskyed]

There is only one aluminum, the other two are steel. I'm sure the weights you have are correct. You can easily modify the bolts to end up at any weight you wish. I have three Schon cues and about 8 weight bolts. All cut to give me a vast assortment of weights. I even cut and drilled out the center of one of the short ones to give me somewhere around .45 oz.

 

[Michael Webb]

My scale says
.7. For 1 1/2 and 1.1 for 1 1/2