Oops Super Glue Stuck on Gold Crown Rails

dave c

Registered
Hi,
This is my first post on AZ but I've been an avid reader here for many many years. I just recently registered with AZ but I have learned so much from the advice and in depth knowledge from everyone over the years that I've never had to ask any questions.

Anyway, last month I found someone who was throwing away a Brunswick Gold Crown I. (Can you believe people would even think such things?) Immediately I jumped on it but I have to tell you it's the most horrible condition I've ever seen a Gold Crown in. Every single nut, bolt, screw and piece of metal hardware is fully rusty. All the paint has chipped off. One of the legs is completely broken. One apron split apart. The chrome is all pitted. Everywhere you look there is just rust, mildew and dirt. Strangely enough the wood frame and slate are absolutely perfect, with the exception of the rusted bolts that hold them together of course. I had a heck of a time dismantling this entire table from the tiny moist cellar it sat in for 30 years.

This table has alot of problems that I'm sure I'll need help with over the next few weeks but first I'll start with my main concern. Someone super glued a Canadian coin or some kind of coin to one of the rails. I'm not sure of what glue or cement was used but I'm sure it's been stuck there for many years. If anyone has any idea as to what can be done to repair this with destroying it I'm open to suggestions.

I'm not looking to restore this table to a showroom finish but I'd like to fix it up to atleast be decent. I can't really complain since the table was free and I enjoy working on these types of projects. I'll post more pics of the table and it's problems if anyone wants to see them.
 

Attachments

  • glue.JPG
    glue.JPG
    81.3 KB · Views: 534
Last edited:
For what it's worth I would first try to get the coin off of there by holding the blade of a large screwdriver against the edge of the coin and giving it a firm smack with a hammer. I think after a few the coin would pop off.

I think acetone may help if the adhesive is indeed super glue, but acetone might attack the laminate. You could test that in an inconspicuous part of the laminate if such a location exists.

It looks like epoxy to me though. In that case you could carefully shave or file it off, but you'd need a steady hand so as not to bugger the laminate.

Just my 2 cents....

Greg
 
coin

Maybe heat...use a soldering iron or a heat source to heat the coin and adhesive. loosing the structure of the compound before smacking it with a screwdriver..hold iron to coin,
#
Nice find
Good luck
-
Have a good day
Rob.M
 
I agree with Rob regarding using heat. I frequently reshaft golf clubs and use a heat gun to "melt" the epoxy in the hosel to loosen it up. Just be careful and go slow. Use a razor blade to gently scrape off any remaining glue.
 
Well the soldering iron trick worked like a charm. The coin popped off with very little effort after applying heat that I didn't even need a hammer, just a screwdriver. I scraped off all the remaining glue very carefully with a tiny razor blade. You'd never know a coin was ever glued to it.

By the way the coin isn't from Canada. It's a 5 cent piece from Singapore.

Thanks to everyone for the help.
 
Back
Top