ITEMS THAT ARE ALREADY SOLD : Predator Air, J&J Jump Cue
Predator 3k7 Specs
Weight : 15.10 oz with removeable weight and 14.00 without weight
Pin Type : Uniloc Joint
Shaft : 1 original 314 shaft ( RARE and completely original, tip, ferrule taper etc. Highly sought after..alone gets 200.00 easy)
Shaft Weight : 3.8oz
Shaft Length 29 1/8 inches long
Tip diamter : 12.8
Balance : With the weight bolt is 19 inches from butt cap and without the weight bolt is 20 inches from butt cap
More Info : The cue has ONLY been used once. The rest of the time it just sat in the Predator Blak Case. I bought the cue no more than 7 months ago and got it as new old stock. The only flaws with the cue is the slight lifting of the clearcoat on the rings in the butt area of the cue whcih is shown in the pictures. The cue comes with Predator joint caps.
Asking Price : 600.00 OBO ( Original MSRP was 1200-1300 and sold for around 900-1000 ). Please no low ball offers. Serious offers only
Arthur Cue ( By Marcus Dienst of Germany )
Model : Lower End Arthur
Joint Type : 5/14x16 Piloted
Butt weight is 15 oz
Shafts : 2 Shafts. One shaft is an original Predator Z shaft whcih was collar matched/mated by KJ Simpson of KJ Cues. The shaft was from an original Z blank that I had sent to KJ along with the butt to get mated. The second shaft is a plain shaft that was collar matched and mated by Ryan Theewen of Rat Cues as well as Mueller's Cue repair Dept. I sent ryan the butt as well as the predator z shaft and asked him to make me a plain shaft with the same aggressive taper of the Predator Z shaft I sent EXCEPT to make it with a 12.25mm tip and not 11.50, which is what the z shaft's taper is.
one shaft was matched and mated to it from an original first gen z blank and the work was done by KJ cues. shaft tip is 11.50mm
Predator shaft weight : 3.25 oz
Theewen shaft weight : 3.55 oz
Theewen Shaft Ferrule Length : .750 inches
Shaft Lengths : 29 1/8 inches long
Cue Butt Length : 29 1/8 inches long
Balance point : with either shaft is roughly 18-19 inches from the butt
Asking Price : 500.00 OBO Please no low ball offers. Serious offers only
Predator Blak Case
Used for storage..basically breand new unused. has pockets specifically for predator air cue
item comes with protective sleeve like the shafts of predator
asking price is 200.00
Predator 3k7 Specs
Weight : 15.10 oz with removeable weight and 14.00 without weight
Pin Type : Uniloc Joint
Shaft : 1 original 314 shaft ( RARE and completely original, tip, ferrule taper etc. Highly sought after..alone gets 200.00 easy)
Shaft Weight : 3.8oz
Shaft Length 29 1/8 inches long
Tip diamter : 12.8
Balance : With the weight bolt is 19 inches from butt cap and without the weight bolt is 20 inches from butt cap
More Info : The cue has ONLY been used once. The rest of the time it just sat in the Predator Blak Case. I bought the cue no more than 7 months ago and got it as new old stock. The only flaws with the cue is the slight lifting of the clearcoat on the rings in the butt area of the cue whcih is shown in the pictures. The cue comes with Predator joint caps.
Asking Price : 600.00 OBO ( Original MSRP was 1200-1300 and sold for around 900-1000 ). Please no low ball offers. Serious offers only
Arthur Cue ( By Marcus Dienst of Germany )
Model : Lower End Arthur
Joint Type : 5/14x16 Piloted
Butt weight is 15 oz
Shafts : 2 Shafts. One shaft is an original Predator Z shaft whcih was collar matched/mated by KJ Simpson of KJ Cues. The shaft was from an original Z blank that I had sent to KJ along with the butt to get mated. The second shaft is a plain shaft that was collar matched and mated by Ryan Theewen of Rat Cues as well as Mueller's Cue repair Dept. I sent ryan the butt as well as the predator z shaft and asked him to make me a plain shaft with the same aggressive taper of the Predator Z shaft I sent EXCEPT to make it with a 12.25mm tip and not 11.50, which is what the z shaft's taper is.
one shaft was matched and mated to it from an original first gen z blank and the work was done by KJ cues. shaft tip is 11.50mm
Predator shaft weight : 3.25 oz
Theewen shaft weight : 3.55 oz
Theewen Shaft Ferrule Length : .750 inches
Shaft Lengths : 29 1/8 inches long
Cue Butt Length : 29 1/8 inches long
Balance point : with either shaft is roughly 18-19 inches from the butt
Asking Price : 500.00 OBO Please no low ball offers. Serious offers only
Predator Blak Case
Used for storage..basically breand new unused. has pockets specifically for predator air cue
item comes with protective sleeve like the shafts of predator
asking price is 200.00
Attachments
Last edited:
