Schmelke Sneaky Pete W/BEM

[DMM4342]

that's because Schmelke has more than one joint, they have at least 5 that I recall. And they are not all the same, thus folks just assume they are ??


But a 3/8-10 Schmelke will take an OB 3/8- 10 pin like butter on bread

When I ordered my M-Series SHEDUA from SCHMELKE, I used their "Build A Cue”; not their words for the software but the name is appropriate. When building an M-Series cue, one is given options of the joint. There were six options and I researched all of them. I chose the 3/8-inch X 10 TPI. I was cautioned by an owner of a SCHMELKE cue (with the 3/8-inch X 10 TPI pin), that his cue was large at the joint.
He advised me to ask David SCHMELKE to make my cue 0.840-inch at the joint, which I have done. An 0.840-inch joint would make it easier to fit a non SCHMELKE shaft onto my SHEDUA cue with a smooth fit.
Dave

 

[sixwillwin]

that's because Schmelke has more than one joint, they have at least 5 that I recall. And they are not all the same, thus folks just assume they are ??

But a 3/8-10 Schmelke will take an OB 3/8- 10 pin like butter on bread

Sorry RJ but i disagree and again I will say this for about the 5th time. I love my Schmelke but disappointed that my joint is .870 ! Mine IS a 3/8 x 10 also. Had i known this would be so big, I would have asked for .840 or close. After market shafts will not look good or play good on my .870 joint size. I have asked aftermarket manufacturers and they all told me this. If i ever order another, I will specify the joint size.

 

[DMM4342]

that's because Schmelke has more than one joint, they have at least 5 that I recall. And they are not all the same, thus folks just assume they are ??

But a 3/8-10 Schmelke will take an OB 3/8- 10 pin like butter on bread

Tell me ChicagoRJ, which SCHMELKE do you have?

(This time is for ChicagoRJ to find his SCHMELKE, please bare with us and we will be back when time permits.)


Now, since we have gotten this far, what joint does it have?
We have gotten that far, NO?
Are you still with us RJ?
Dave