Sherline CNC Indexer

Thanks for the link. I have a project coming up that will make a good use for that small table and with the adjustable angle plate as well.
I've also been looking at those cheaper harmonic drives from ebay/ aliexpress. But just not sure of the 2 which is really the better way to go for making small things.
Neil
 
conetip said:
Thanks for the link. I have a project coming up that will make a good use for that small table and with the adjustable angle plate as well.
I've also been looking at those cheaper harmonic drives from ebay/ aliexpress. But just not sure of the 2 which is really the better way to go for making small things.
Neil
Click to expand...

I've had the Sherline for more than 10 years and couldn't live without it. It has it's own computer so that it works great stand alone but can also be slaved to your CNC program very easily. I'm always on the hunt for a second unit but no one sells them at a little discount.

Dick
 
Hi Dick, How are you using it with Mach 3 ?
What G code are you using to make it work ?
Can you have the rotary table turning or incrementing through say a 30 deg arc and then can you program XYZ to be moving with the Mach 3 so effectively all 4 axis are moving in the cut ?
Thanks Neil
 
I have the control box with power supply and motor cable. Not sure what happened to the motor. That is not a big deal if you know how to wire a connector and a stepper.

Jim
 
Thanks for all the replies and private messages. I found what I was looking for
at a little discount.
 
You must log in or register to reply here.
Back
Top