Taig T slot dimensions please

[dbldown]

I need a few measurements please from anyone with a Taig cross slide.
- width of T slot opening at the surface
- width of T slot at the interior
- depth of T slot from the surface the the bottom

I am trying to mount a Taig compound slide on top of a piece if extruded 8020 Aluminum. There are many styles it comes in so knowing the Taig T slot dimensions ensures I get something that works.

 

[BigDon]

Not sure exactly what your trying to do but if your just using the compound slides and no carriage would the plate that goes between the two slides work for your bottom mounting plate? If so, I will measure mine tonight when I get home if you don't have one. If your mounting a carriage and cross slides, then you could use part number 200-48 on 20 profile 8020 aluminum. Like the 1020 or 2020 bolts right up.

 

[dbldown]

Havibg trouble finding tgat part.

I did fid a product fron Woodpeckers tgat is used on router tables ect. It is T track, 3 on one sife, 2 on other, the slot os 1/4 inch wide, which I believe is tge width of the taig platrs.It is 7/16 wide in the channel and more than deep enough. It is mounted from the bottom center channel and the top will have 2 slots and a 3 inch wide surface for mounting the slide. 6 inch piece is just 13 dollars should work well.