
I need more coffee.
Andy
DawgAndy said:Without sounding like too much of a brown noser, I would like to thank all the cue makers that post on this forum your depth of knowledge is amazing. It makes us all more informed consumers. That being said, Mr. Bludworth your knowledge is incredable and the fact that you give so much of it away is not lost on anyone here. You are a credit to the craft of cue building. There are probably other cue makers that cringe when someone tells them "well Blud said..." Once again thank you to everyone. After playing pool half my life I've learned more about cues on this board in a year than 15 years loafing in a pool room.
I need more coffee.
Andy
blud said:Good mornin Andy,
Thanks.
I have caught a lot of heat for many years because of my sharring information with folks like you.
I'll explain this in depth, on a new thread, if anyones interested. This will also include the formation of the American Cuemaker Association, which I was the founder.
Just let me know? It's kind long..
blud
((VH)) said:hI bLUD,
Can't hardly wait to hear the full story![]()
Buld, I will say this about you I think its great that you take the time to do what you do here. I do see some others here ( cuemakers ) do the same you know who you are and I think its great. all I can say is "ROCK ON" I have learned more from this site about cue repair (that what I do ) not a maker just a repairer then I could have ever dreamed of. I feel like I'm stealing with the FREE info I get here. For those of you that answer questions from people like me I will buy your products and support you in years to come just to say "THANK YOU !!!!!!!!!!!"blud said:Hi VH,
I'm trying to get a new 2-headed, CNC machine ready for delivery this next week. You guys have my word, you will hear the "true story".
It's kinda long and drawn out, and may have to be done in two or three differant post. I'll do my best to get on it in a few days.
blud
seven said:so true!!!!!!!! I'm just getting into cue repairs & I've learned soo much already. I dont know what I would do without this forum. thanks all !!!!!
macguy said:If you wind back the clock 20 years or so, what you are trying to do would be very, very, hard. There were no forums like this and the net. There was no information available at all. You spent hours going through the Thomas Register looking for sources and information. Then more hours on the phone with the people you found. The weeks waiting for a samples only to find they were not what you wanted. Once you found some useful information you protected it because that piece of material you are using for some inlay or joint or something may be the result months of research. the kind of research that can be done on the net today in a afternoon. This is where people like Blud come from. A guy like him may spend countless hours working out something and then someone on here can just ask "How is it done" and if he or some other cue maker chooses, they may just give away this hard earned knowledge.. Just a simple question like "Hay, where do you buy that stuff". The answer can be worth a lot. It is astonishing they actually do it. I once asked a simple question of Richard Black and he insulted me to my face.
Metzger said:I agree with all these guys. We should feel special that we have the likes of Blud, Mike Webb, Paul Fanelli, Sherm, and Chris Hightower here answering our questions. A special thank you should esp. go out to Blud, Mike, and Chris who spend a lot of time answering questions and putting up with all the crap from the know-it-alls. Anyone else would have left long ago.
Tommy-D said:> I want to personally thank everyone that contributes to this forum with positive spirit,quality information,and questions that I haven't thought of or haven't got around to asking yet. I am taking a machinists course to hone my machining skills and knowledge of equipment and tooling,and a basic understanding of CNC programming,as the base for what will eventually become my cue shop. I have been saving threads from here,CCB,RSB, magazines,and am planning on buying Chris' book and saving it into what is becoming a very large text document,in my efforts to learn as much as I can before ever taking my first cut on a cue,no sense in wasting wood,right? I have been doing repairs for customers such as simple shaft cleaning,reconditioning,retapering,ferrules,tips and wraps for 6 years,and my own repairs for several before that,and people come to me for quality work,and out-of-my-way service. Building on that,is one of my personal goals for my business. I am also putting together a business plan. All this,plus the heart to make it happen,will get me there,the great people that come here are a big help,and I can't thank you enough. Tommy D.
Tommy-D said:> I am leaving tonight to go visit my grandparents,and show off my 28 month old son,along with picking up my grandfathers machinists tools,and will call you as soon as I can afterwards. Thanks,Tommy D.
I have not seen Paul here in a while.Metzger said:I agree with all these guys. We should feel special that we have the likes of Blud, Mike Webb, Paul Fanelli, Sherm, and Chris Hightower here answering our questions. A special thank you should esp. go out to Blud, Mike, and Chris who spend a lot of time answering questions and putting up with all the crap from the know-it-alls. Anyone else would have left long ago.
Joseph Cues said:I have not seen Paul here in a while.
Paul had a ton to contribute and is definitely a non-combative type person.
I can understand if he doesn't post here again.
Paul's work I think reflects his personality.
Paul, thanks for all the tips.
![]()
Joseph Cues said:I have not seen Paul here in a while.
Paul had a ton to contribute and is definitely a non-combative type person.
I can understand if he doesn't post here again.
Paul's work I think reflects his personality.
Paul, thanks for all the tips.
buddha162 said:Paul's work is amazing.
He's also one of the most accomodating cuemakers I know; I've dropped in on him unannounced to trim a tip and he invited me in graciously, saying that he always try to make time for the players who needs some tip/shaft work done on the fly.
Here's another Fanelli cue from classiccues. Notice how deep and tight the points are, and those butterfly splices are done so tastefully, they didn't overwhelm the cue just gave it a little "lift.".
-Roger
Metzger said:I agree with all these guys. We should feel special that we have the likes of Blud, Mike Webb, Paul Fanelli, Sherm, and Chris Hightower here answering our questions. A special thank you should esp. go out to Blud, Mike, and Chris who spend a lot of time answering questions and putting up with all the crap from the know-it-alls. Anyone else would have left long ago.