WTB aluminium bolt for schon ltd cue

[mmasou]

hi im looking for an alumiinium bolt with a screw pin that I can have as a spare to try out with lighter shafts.
i can post pics of the current bolt if needed. i was able to unscrew the bolt with a little trial and error, no damage to butt cap. i know some people have them glued on and very hard to unscrew.

anyone can find me an aluminium one i would be very glad to get it.
in the meantime I sent an email to schon but it may take a while , and it's probably not a good thing to tell them that basically you've been taking their cue apart, lol.
plus warranty is voided but that's ok with me, the cue is just fine and it will be fine.

 

[mmasou]

anybody can help me out with this one?

 

[skip]

Atlas has the bolt.

 

[Killer_Kenny]

Schon weight bolt

You'll need to machine a flat on the underside of the head of a conventional Aluminum weight bolt. Anyone with a lathe can do it. I've done in many times.

 

[luke]

For a really light butt bolt, try a 3/8x16 nylon pan head or hex bolt from Home Depot. You can drill out the center for the butt cap screw and sand the top to fit and cut a notch for a screwdriver. It costs about $1 and weighs about 1/10oz.