I have a Dufferin flame series conversion for sale. I removed the original brushed ss joint & pin. installed an ABS joint with black and white ringwork with a 3/8x10 pin flat faced joint. I also removed the generic bumper and bored out the butt to perfectly fit a brown bumper for a great old school look. This is a rare or hard to find butt that has the green and maple veneers. The pin was marred some so i shaved it slightly to remove the nicks. The cue is straight together and apart and has a beautiful finish. The wood is fantastic in this cue. It is very dense and naturally weights in at 15.9oz for the butt and a dense 4.1oz for the 13mm G-Core with Talisman hard. The original shaft i tapped out for it was not grade A maple and the threads were stripping out so i just decided to use the G-core which hits great and matches up to the joint. The cue is straight together and apart and to prove it i have included a video. If you are not satisfied please pm me first for a refund before posting anything negative. Sold! shipped USPS Priority conus with confirmation.:wink:
Video Link 
Last edited:
