For sale is a Mezz Set.
Cues:
Playing: EC7-J (Ironwood) with WD700 shaft
Breaking: Power Break II with DI break shaft & Dymondwood Break Shaft
EC7-J Details:
Iron Wood Forearm and Butt Sleeve
Double Silver Rings at Joint
Mezz United Joint
Stitch Rings above and below Wrap
Black Irish Linen Wrap
WD700 Shaft with Moori Tip Medium @ 12.5mm
Shaft Weight: 3.8 oz
Butt Weight: 14.66 oz
Total Cue Weight: 18.46oz
PB2 Details:
Laminated Cocobola Forearm that is impregnated with phenolic resin.
Overall Cue Length is 4" shorter than average break cue.
Mezz United Joint
Wrapless cue with three weight rings infront of grip area
Default Shaft: PowerBreak Deep Impact Shaft with Bakelite Ferrule and Mezz Sonic Tip @ 13mm
Separate Shaft: Joe Bouska Dymondwood Shaft with Phenolic Ferrule and Samsara Jump Break Tip, 5/16x14 pin insert
Dymondwood shaft can be used on other break butts that fit 5/16x14 pin
Butt Weight: 14.85oz
Default Shaft Weight: 4.4oz, => 19.25oz with PB2 Butt
Separate Shaft Weight: 6.83oz, => 21.68oz with PB2 Butt
Case: C24K 2x4 Case
Case has individual hard tubes for 2 Butts and 4 Shafts.
Two handles, one on top, one on side.
Can fit butt and shaft lengths of 30" with JPs without a problem.
Top seals up, so cues are not as exposed to outside environment
Flat top, and does not touch or scratch cues when closing.
Has two pouches, the small chalk pouch has a top pouch for cell Phone
The second pouch has a side slot for jump handle.
Adjustable Shoulder strap
Imitation Leather type material, could be vinyl, not sure.
Has Old Predator Patch on it (can anyone else see the Irony?)
Sorry, Not interested in trades.
EC7-J Cue: Retails for $410, asking for Sold Shipped
PB2 Cue with DI shaft: Retails for $465, asking for Sold
Dymondwood Shaft: Asking Sold
2x4 Case: Retails for $95, Asking $60 shipped (shipping is expensive for cases)
All Cues come with Joint Protectors.
PM me if you have any questions or want to see more pictures.
Thanks
Cues:
Playing: EC7-J (Ironwood) with WD700 shaft
Breaking: Power Break II with DI break shaft & Dymondwood Break Shaft
EC7-J Details:
Iron Wood Forearm and Butt Sleeve
Double Silver Rings at Joint
Mezz United Joint
Stitch Rings above and below Wrap
Black Irish Linen Wrap
WD700 Shaft with Moori Tip Medium @ 12.5mm
Shaft Weight: 3.8 oz
Butt Weight: 14.66 oz
Total Cue Weight: 18.46oz
PB2 Details:
Laminated Cocobola Forearm that is impregnated with phenolic resin.
Overall Cue Length is 4" shorter than average break cue.
Mezz United Joint
Wrapless cue with three weight rings infront of grip area
Default Shaft: PowerBreak Deep Impact Shaft with Bakelite Ferrule and Mezz Sonic Tip @ 13mm
Separate Shaft: Joe Bouska Dymondwood Shaft with Phenolic Ferrule and Samsara Jump Break Tip, 5/16x14 pin insert
Dymondwood shaft can be used on other break butts that fit 5/16x14 pin
Butt Weight: 14.85oz
Default Shaft Weight: 4.4oz, => 19.25oz with PB2 Butt
Separate Shaft Weight: 6.83oz, => 21.68oz with PB2 Butt
Case: C24K 2x4 Case
Case has individual hard tubes for 2 Butts and 4 Shafts.
Two handles, one on top, one on side.
Can fit butt and shaft lengths of 30" with JPs without a problem.
Top seals up, so cues are not as exposed to outside environment
Flat top, and does not touch or scratch cues when closing.
Has two pouches, the small chalk pouch has a top pouch for cell Phone
The second pouch has a side slot for jump handle.
Adjustable Shoulder strap
Imitation Leather type material, could be vinyl, not sure.
Has Old Predator Patch on it (can anyone else see the Irony?)
Sorry, Not interested in trades.
EC7-J Cue: Retails for $410, asking for Sold Shipped
PB2 Cue with DI shaft: Retails for $465, asking for Sold
Dymondwood Shaft: Asking Sold
2x4 Case: Retails for $95, Asking $60 shipped (shipping is expensive for cases)
All Cues come with Joint Protectors.
PM me if you have any questions or want to see more pictures.
Thanks
Last edited:
