Lighting, what are my options?

JazzboxBlues

JazzboxBlues

AzB Silver Member
Silver Member
My wife wants to do some renovating and gave the okay for a 9' Diamond. The problem at hand is a duct that will run above the table not allowing room for the matching light fixture in the proper size. I could get the small one centered above the table without interfering with the duct. Could I convert the small one to LED and it give off enough light? I assume if I don't use the small Diamond fixture there is some kind of LED fixture that is thin enough that I could mount it high enough for the table and stay under the duct. Any thoughts or ideas would be appreciated.
 
A picture is worth a thousand words. Any chance you could provide a picture of the space and ducting that interferes? It would make it easier to offer suggestions.
LED panels are definitely lower profile in general. Not sure about the retrofit on the Diamond light fixture, but also not sure how hung up you are on using the Diamond fixture either? There is a poster on here who sells LED pool table lighting. That maybe your best bet.
 
thanks bill!

contact me if these will suit your needs


All pics in this link
http://forums.azbilliards.com/showthread.php?t=422979


attachment.php


attachment.php
 
Last edited:
JRusso said:
A picture is worth a thousand words. Any chance you could provide a picture of the space and ducting that interferes? It would make it easier to offer suggestions.
LED panels are definitely lower profile in general. Not sure about the retrofit on the Diamond light fixture, but also not sure how hung up you are on using the Diamond fixture either? There is a poster on here who sells LED pool table lighting. That maybe your best bet.
Click to expand...

here is a brunswick fixture refitted for my LED flat panel



attachment.php
 
Those will work. I'd really like to retrofit a Diamond fixture but it's 20" x 60". Anyway to fill it with LED panels?
 
LEDs in diamond lighting...

JazzboxBlues said:
Those will work. I'd really like to retrofit a Diamond fixture but it's 20" x 60". Anyway to fill it with LED panels?
Click to expand...

Not sure but I cut the ballasts out of the fixture they sent with my diamond light and direct wired LED T8's... works perfectly AND doesn't trip the GFCI.

I posted pictures in a thread about my garage set up... I'll try and find the link.
 
You must log in or register to reply here.
Back
Top