Jeff Bell Custom cue pin size

ine

ine

AzB Silver Member
Silver Member
Hi all

I need a little help. I have a customer that has bought a Jeff Bell custom cue on ebay and he wants a new shaft. It seems to me that this is a 3/8-11 pin, it is definitely not a 3/8-10. I can only find the 3/8-11 in brass but this is not brass.

Anyone know if Jeff Bell cues are known to have the 3/8-11?

Thanks

Ine:)
 
Possibly a 3/8-10 flat thread so many cuemakers are using.
Even OB cues is using that pin.
I would reach out to Mike Webb in the cuemaker section, he can explain it from a technical standpoint.
Mike even has 3 different arbors just for 3/8-12, so he has worked with everything.

Some of the 3/8-10 stuff is interchangeable and some isn't.
I'm confused because I know people have had an issue with the OB 3/8-10 flat thread, because their cues are on thing, then they sell shafts for the old style 3/8-10.
I thought OB called their pin "modified 3/8-10 flat thread" but the modified 3/8-10 flat thread pins we have been using are interchangeable with everything.
 
cuesblues said:
Possibly a 3/8-10 flat thread so many cuemakers are using.
Even OB cues is using that pin.
I would reach out to Mike Webb in the cuemaker section, he can explain it from a technical standpoint.
Mike even has 3 different arbors just for 3/8-12, so he has worked with everything.

Some of the 3/8-10 stuff is interchangeable and some isn't.
I'm confused because I know people have had an issue with the OB 3/8-10 flat thread, because their cues are on thing, then they sell shafts for the old style 3/8-10.
I thought OB called their pin "modified 3/8-10 flat thread" but the modified 3/8-10 flat thread pins we have been using are interchangeable with everything.
Click to expand...

Thanks. I did compare it with, and tried my OB shaft from my personal OB cue so it is not the same. I can see the thread is a tiny bit tighter so my guess is 3/8-11. It may even be a 3/8-12. I will measure it and ask in the Cuemaker section if no one knows for sure:)
 
ine said:
Hi all

I need a little help. I have a customer that has bought a Jeff Bell custom cue on ebay and he wants a new shaft. It seems to me that this is a 3/8-11 pin, it is definitely not a 3/8-10. I can only find the 3/8-11 in brass but this is not brass.

Anyone know if Jeff Bell cues are known to have the 3/8-11?

Thanks

Ine:)
Click to expand...


3/8x11 comes in different materials besides brass. Send a pm to Az'er Jlroe. In his past post, he says he's a friend of Mr. Bells.
 
In Az history I found this.
Jeff Bell
Noblesville Indiana
317-753-2558
It was posted years ago. The only pictures I saw, had a radial pin joint screw.
 
I will see if I can make a picture of it next to my OB 3/8-10, that may help..

I did try to find Jlroe, bit it seems he no longer has that username.
 
Last edited:
Jeff Bell.jpg

Hi all

Sorry this took so long. The posted picture shows the Jeff Bell on the top and my OB cue with a 3/8-10 on the bottom. I have measured and counted and it seems it can be a 3/8-12?

Any help is appreciated:)
 
ine said:
View attachment 515108

Hi all

Sorry this took so long. The posted picture shows the Jeff Bell on the top and my OB cue with a 3/8-10 on the bottom. I have measured and counted and it seems it can be a 3/8-12?

Any help is appreciated:)
Click to expand...


3/8x12 is very common in some cues. The biggest problem you have is, your in Norway. I suggest finding a machine shop and asked them to measure what you actually have. This is the 3/8x12 next to the modified 3/8x10.

IMG_20190314_082811.jpg
 
You must log in or register to reply here.
Back
Top