Anyone own a Dynamic 2,3 or Rasson V2? Pocket size + angles need please!

[Sean Hallett]

Hi guys.
The title kind of says it all but I am looking for a new 7ft table and i'm trying to decide which one I should go with. I live in Europe so Diamond and Valley are really expensive and hard to get so them 3 tables are my options.

I've previously owned a Brunswick gold crown with 5 inch pockets but the pocket angles were brutal for rail shots hit with power! I'd rather have slightly smaller pockets with a much better pocket angle.
Does anyone have access to any of these tables and would mind telling me the pocket size/ angle? I have checked the TDF thead and there is one eurotour dynamic 3 which is helpful but I need to know the other 2. Plus i'm not sure if the pocket angle listed for that is correct as it falls outside the epbf range?
Any info you have would be much appreciated, thanks!

Sean

 

[trentfromtoledo]

Hi guys.
The title kind of says it all but I am looking for a new 7ft table and i'm trying to decide which one I should go with. I live in Europe so Diamond and Valley are really expensive and hard to get so them 3 tables are my options.

I've previously owned a Brunswick gold crown with 5 inch pockets but the pocket angles were brutal for rail shots hit with power! I'd rather have slightly smaller pockets with a much better pocket angle.
Does anyone have access to any of these tables and would mind telling me the pocket size/ angle? I have checked the TDF thead and there is one eurotour dynamic 3 which is helpful but I need to know the other 2. Plus i'm not sure if the pocket angle listed for that is correct as it falls outside the epbf range?
Any info you have would be much appreciated, thanks!

Sean

The NEW Rasson OX is badass. I got a chance to play on one a couple months ago.
4.5" corners @141 degrees and 5" sides @ 102 degrees. Very deep pocket shelf similar to the Diamond. Klematch P59 cushions. Banks awesome, By far the only real competition/closest play to the Diamond tables. Full leveling system in the aluminum frame. levelers in the legs. This one is what they debuted at the last Mosconi Cup. I mainly work on Brunswick commercial tables and a Diamond Dealer/ tech. I hope this helps.

TFT

https://www.rasson.cn/ox

 

[Sean Hallett]

The NEW Rasson OX is badass. I got a chance to play on one a couple months ago.
4.5" corners @141 degrees and 5" sides @ 102 degrees. Very deep pocket shelf similar to the Diamond. Klematch P59 cushions. Banks awesome, By far the only real competition/closest play to the Diamond tables. Full leveling system in the aluminum frame. levelers in the legs. This one is what they debuted at the last Mosconi Cup. I mainly work on Brunswick commercial tables and a Diamond Dealer/ tech. I hope this helps.

TFT

https://www.rasson.cn/ox

The 4.5" pockets at 141 degrees is what the new epbf standard is according to their website. Which is why i'm questioning the 138.7 degree listing of the Dynamic III on the TDF thread. The OX is nice but if it is the same specs and cushions as the V2 i'd rather have that Unless the Dynamic III really is 138.7 degrees on the same 4.5 inch pocket because i'd rather have that for when the cloth wears a bit and rail shots don't rattle out.

 

[Sean Hallett]

Dynamic finally got back to me
"both, the Dynamic II and III tables have the same measurements and meet the EPBF table sanctioning checklist which is as follows:



Corner Pocket size mouth 110mm +- 2mm

Middle Pocket size mouth 125mm +- 2mm



Angle of cushion cut at corner mouth opening 142 degrees +-1

Angle of cushion cut at middle mouth opening 104 degrees +-1"

I was right in thinking that the TDF that someone posted for the eurotour dynamic 3 is wrong.

 

[trentfromtoledo]

The OX is nice
but if it is the same specs and cushions as the
V2 i'd rather have that

The playing specs are the same between the OX
and the price is not to far off from one another.
OX ($5980.00usd) -vs- V2+ ($7080.00usd)

Are you aware that the 7' Rasson V2+($7080.00usd)
is about $2180.00usd MORE than a 7' Diamond
Pro Am at $4900.00usd...

I am a Diamond and Rasson Dealer and have an
International Export Freight Company I deal with.

You would have to pay the import taxes and freight.

The playing specs are the same between the
OX ($5980.00usd)and V2+, but, the price is not
to far off from one another.

At the end of the day you are putting out a bunch
of cash, $1-2k should not put you "on the fence"
on a purchase such as this and if it does, you should
save the extra money and get what you want. Let me
know how I can help you!

TFT