I believe Chem-Pak has the same consistency as the Meguiar's Cleaner Wax and the Aramith Ball Cleaner. As mentioned above, you'll have to thin it out to spray it. The Tiger Products cleaning solution can be sprayed right out of the bottle; no mixing necessary.
One thing to note: I had to re-engineer the cleaning surfaces of my unit (custom build Gold Crown Ball Polisher using the same engineering and specs as a Diamond Single Platter). I bought the Diamond Sprocket and carpet set for my unit but was very disappointed in the performance with that setup using the Tiger Products cleaning solution. The carpet Diamond sells is not absorbent at all and therefore it just smeared the Tiger Products solution on the balls leaving them hazy even after a 5+ minute run in the machine. Diamond's carpet works with the car wax because car wax has drying properties so the product doesn't need to be absorbed into the cleaning surface. You may or may not run into this issue with any diluted solution. My fix was to use standard pile carpet that I had been successfully using in my bucket polisher for years and a 1/4" peel and stick foam rubber pad on the platter covered by an 11" microfiber orbital buffer bonnet. I kept the same carpet on the sprocket it came with. Here's an 8B after a couple minute run in my polisher using the Tiger Products solution and the carpet/microfiber combo.
Cleaning surface setup on my unit:
