Lathe wanted

epoxypop said:
I agree that it's probably a pos,, only because it's coming from China with no support. However is it written in stone what a live thread has to be something that everyone else uses., . I'm thinking anyone can build a machine and their live threading doesn't have to match anyone else's just as long as it's consistent with their work only.We are not making bolts, but threading wood.
Click to expand...
I like 3/8 10 pins. Prejudice against 11tpi because then people will accuse me of coveting southwest. 18tpi is the standard for ferules if you ever happen to use a pre made one. Other than that I agree completely. I use 16tpi anywhere I can because on my metal lathe you can engage it on any number or half number on the thread dial without risking cross threading when using multiple passes. This is quicker for me than waiting for the dial to come around to the right number and also eliminates boo boos when my mind is wandering.
 
BarenbruggeCues said:
One thing I've noticed is it will only go down to 11tpi for threads. Not a good deal for anyone cutting 10tpi for pins.
Don't have one but looks like it may have potential for a secondary lathe for odds and ends.
Don't believe it would work for a main set up.

As for as being a POS just because it's made in China can be a misconception because of bias.
I've purchased many things from China that are made as well or BETTER than things made anywhere else in the world.
You just need to do your due diligence before making any purchase. No matter where a product is made.
It's funny how some degrade overseas made products then jump on their horse and run to Home Depot, Lowes or Harbor Freight and make a purchase not understanding that 80 to 100 percent of stuff in those stores are made overseas.
Case in point, I have a friend who is on this buy American gig and when I walked into his house and had a quick look around.....you can imagine what I noticed. :rolleyes:
Click to expand...
I think all of your points are valid but the support thing is a concern in my mind. Just reading the electrical board replacement statement on the thing makes me nervous. That was the best translation they could come up with imagine if you have a real problem and need help? Even well built stuff breaks from time to time.
 
Coos Cues said:
I like 3/8 10 pins. Prejudice against 11tpi because then people will accuse me of coveting southwest. 18tpi is the standard for ferules if you ever happen to use a pre made one. Other than that I agree completely. I use 16tpi anywhere I can because on my metal lathe you can engage it on any number or half number on the thread dial without risking cross threading when using multiple passes. This is quicker for me than waiting for the dial to come around to the right number and also eliminates boo boos when my mind is wandering.
Click to expand...
Who uses "standard" cue building threads?
Mostly the repairs guys because it's easier for them.
All of my threads are my standard and very little of any are standard cue building threads. ;)
I do very little repairs on any other cues so it really doesn't matter to me.
 
Coos Cues said:
I think all of your points are valid but the support thing is a concern in my mind. Just reading the electrical board replacement statement on the thing makes me nervous. That was the best translation they could come up with imagine if you have a real problem and need help? Even well built stuff breaks from time to time.
Click to expand...
You've got that right! And when you least expect it or at the worst time for you. I guess there never is a "good" time for a break down tho! :LOL:
 
Coos Cues said:
I think all of your points are valid but the support thing is a concern in my mind. Just reading the electrical board replacement statement on the thing makes me nervous. That was the best translation they could come up with imagine if you have a real problem and need help? Even well built stuff breaks from time to time.
Click to expand...
I'm never in that big of a hurry to tap or thread anything. I do all of it by hand turns our perfect and doesn't take much time
 
Last edited:
BarenbruggeCues said:
One thing I've noticed is it will only go down to 11tpi for threads. Not a good deal for anyone cutting 10tpi for pins.
Don't have one but looks like it may have potential for a secondary lathe for odds and ends.
Don't believe it would work for a main set up.

As for as being a POS just because it's made in China can be a misconception because of bias.
I've purchased many things from China that are made as well or BETTER than things made anywhere else in the world.
You just need to do your due diligence before making any purchase. No matter where a product is made.
It's funny how some degrade overseas made products then jump on their horse and run to Home Depot, Lowes or Harbor Freight and make a purchase not understanding that 80 to 100 percent of stuff in those stores are made overseas.
Case in point, I have a friend who is on this buy American gig and when I walked into his house and had a quick look around.....you can imagine what I noticed. :rolleyes:
Click to expand...
i really wasn't bashing China. You are right most of everything we have came from China. I was bashing this particular item because of no support and not much communication with the seller This lathe might be a good thing We will never know until someone pulls the trigger and buys one, then gives us the report
 
Last edited:
epoxypop said:
i really wasn't bashing China. You are right most of everything we have came from China. I was bashing this particular item because of no support and not much communication with the seller This lathe might be a good thing We will never know until someone pulls the trigger and buys one, then gives us the report
Click to expand...
I know some who have pulled the trigger on one. Not my place to review it for them. I haven't heard of any complaints.....but I also haven't heard high praise either.
 
You must log in or register to reply here.
Back
Top