Wood veneer wrap as handle

-CR-

AzB Gold Member
Gold Member
Cuetec and Becue are two companies I know of that offer wood veneer as a wrap on a handle, and wondered are there any custom cue makers out there that also do this? I personally like the idea if the line on the wrap is seamless, and there are no issues down the road. A high quality piece of veneer with consistent grain wrapped all the way around the cue, no A/B sides when rotated.
 
Cuetec and Becue are two companies I know of that offer wood veneer as a wrap on a handle, and wondered are there any custom cue makers out there that also do this? I personally like the idea if the line on the wrap is seamless, and there are no issues down the road. A high quality piece of veneer with consistent grain wrapped all the way around the cue, no A/B sides when rotated.
There are some old discussions in these forums about making a cue "wrapless" that cover this. You might search for those.

Probably many cue makers could/would do it. Making the seam not visible is the challenge. The first thing would be selecting the right wood I would think.

We'll see if the cue makers have much to say on this.
 
There are some old discussions in these forums about making a cue "wrapless" that cover this. You might search for those.

Probably many cue makers could/would do it. Making the seam not visible is the challenge. The first thing would be selecting the right wood I would think.

We'll see if the cue makers have much to say on this.

Making the veneer line invisible would only be possible on a very select few pieces of veneer from very straight grain, dark woods with no figure. Even then it is a bit of a crapshoot.

I wouldn't ever do a one-piece wrap. I might do a segmented veneer wrap to incorporate the veneer changes into a design on an existing cue, but that would be an extremely rare occurrence that would depend on a lot of factors.

For every person who thinks a cue with a veneer wrap is cool, there are probably a dozen who would think it looks cheap. The two companies mentioned are not really known for building great looking cues. They have incorporated something in their manufacturing process that reduces the changes they have to make to their existing cues to drastically change the look. In other words, this is the cheapest and easiest way for them to create a 'new' line of cues.

If a person wants a cue that looks more consistent radially, as the OP mentioned, I would strongly push them toward a well-done radial segmented cue as there are actual benefits to that method of construction.
 
Making the veneer line invisible would only be possible on a very select few pieces of veneer from very straight grain, dark woods with no figure. Even then it is a bit of a crapshoot.

I wouldn't ever do a one-piece wrap. I might do a segmented veneer wrap to incorporate the veneer changes into a design on an existing cue, but that would be an extremely rare occurrence that would depend on a lot of factors.

For every person who thinks a cue with a veneer wrap is cool, there are probably a dozen who would think it looks cheap. The two companies mentioned are not really known for building great looking cues. They have incorporated something in their manufacturing process that reduces the changes they have to make to their existing cues to drastically change the look. In other words, this is the cheapest and easiest way for them to create a 'new' line of cues.

If a person wants a cue that looks more consistent radially, as the OP mentioned, I would strongly push them toward a well-done radial segmented cue as there are actual benefits to that method of construction.
Thanks. That nails it down I think. (y) (y) (y)

When this comes up I always wonder if there is any real "good reason" to do it.

Often people will ask about it because a cue has a wrap and they prefer wrapless "feel". The easiest answer is get a different cue. But if they really want that specific cue, just have it done with the finish over the wrap.

Then, if they are going for the wrapless look aesthetic, again, get a different cue. If you must have a specific cue, have the wrap finished over.

Years ago we had a maker on the forum selling "custom cues" It turned out his points, rings, inlays, and everything were veneers and he was hiding that. And he was doing it on cheap Taiwan imported cues. It makes me think of the old marquetry cues. That could be a thing...beautiful things can be done with veneers, but not if you are hiding it or being dishonest about the work.

As you said, those mass producers doing it are just creating a way to add options or models without redesigning a cue or building a different cue. It's cheaper. I didn't even know they were offering that! But I never look at thos cues, so how whould I know?

I suppose there are makers willing to do it to a cue if the customer requests it and they are willing to pay, and there are those who will just say no "I don't do that".

Just about any cue maker can do it. Fewer would do it.

I just don't see a good reason to do it anyway.
 
New cue with said veneer wrap. Cored exotic even double cored exotic wood if the burl for example is heavy.
Doing an existing Cue converting it to a veneered wrapless

YOU'D be nuts to try.
 
Here's Becue touting wood on its carbon fiber butt: "genuine wood veneer, not a print, not a texture".

Wood has always belonged in the game. There is something irreplaceable about wood. A warmth under your fingers. A story in every grain. A connection to the roots of billiards that no engineered material can fully replicate — and we've never pretended otherwise.
But Becue was built on a different promise: monolithic carbon fiber, unbroken from tip to butt, delivering a level of consistency and power transfer that wood construction simply cannot achieve. We were not willing to compromise that.
WAS is the answer to the question we kept asking ourselves: what if you didn't have to choose?
The name says it plainly. W.A.S. Wood As Skin.
Wood applied to carbon as a natural veneer, a real layer of timber wrapped around the monolithic carbon fiber structure that defines every Becue cue.
This is not a wood cue with a carbon core.
The carbon structure is intact, uninterrupted, carrying every vibration, every impact exactly as our other cues do.
The wood is real — a genuine wood veneer, not a print, not a texture — but it carries no mechanical role. It does something more subtle:
it breathes warmth into your hands.

Looks OK:
Becue veneer.jpg
 
I've done it. Pro's- the best looking woods go to the veneer shops first, so you can find some extremely beautiful wood for reasonable price, no a-b sides, can use what ever tonewood structurally underneath. Con's- if the wood is able to hide the seam on it's own, why are you using it? This technique really lends itself to some intense burl woods for the looks covering something else for structure. Really need to use some marquetry to trim in the seams and make it look 100%
 
The main reason I brought it up is the A/B side. I build custom furniture and cabinets as my day job and use all sorts of veneer and solid wood so I have a great appreciation for all types of wood species and their characteristics. It just makes me cringe sometimes seeing a really expensive custom cue with huge knots, mineral deposits, other natural defects and being marketed as a "unique."
 
These veneers are ultra thin. If you at some point need to refinish the cue, it's gonna be hard..
Personally I don't thing carbon fiber cue butts looks nice, but I where to make one, and the handle should have a wood finish, why not just use a wood handle? If it's the thought that a carbon fiber cue can't warp that's the appeal, why not just use a carbon fiber core and construct the rest like a normal cue?
 
These veneers are ultra thin. If you at some point need to refinish the cue, it's gonna be hard..
Personally I don't thing carbon fiber cue butts looks nice, but I where to make one, and the handle should have a wood finish, why not just use a wood handle? If it's the thought that a carbon fiber cue can't warp that's the appeal, why not just use a carbon fiber core and construct the rest like a normal cue?
Exactly what I was thinking... Would be easier to stick a carbon core inside of a cored piece of wood than wrap a veneer over a carbon tube...
 
Predator C4 butt description.jpg

Predator has veneered (thin sleeved?) a laminated maple core. Predator does not call the exterior on its C4+ four-piece maple butts a veneer --- "Exotic woods and precious stones are inlayed on a thin sleeve and sheath the C4+ core".

On the Predator C10+ ten-piece maple butt, Predator describes the exterior "A thin sleeve of exotic woods sheaths the C10+'s core".

Predator has a 30-piece P3 butt that has about 15 pieces of maple and 15 of ash.










Predator C10 butt construction.jpg
Predator P3 butt construction.jpg
 
Back
Top