What joint does your playing cue have?

What joint is your playing cue?

  • 3/8x10

  • 3/8x11

  • 3/8x14 (Cuetec)

  • 3/8x16 (McDermott Quick Release)

  • 5/16x14 (Flat Face)

  • 5/16x14 (Pilot)

  • Radial

  • Uni-Loc Quick Relsease

  • Viking Quick Release

  • other (type in the comments)


Results are only viewable after voting.
I have a Valhalla with a 5/16 X 18 and a Viking with 5/16 X 18 quick release.

I accidentally put the Valhalla shaft on my Viking the other night, and was surprised to see that it fit perfectly.
 
3/8x11, before was modified (US) 3/8x10, before that Mezz Wavy

Besides the Mezz being annoyingly stiff, can't say I notice the difference between any of the three.
 
I have a Valhalla with a 5/16 X 18 and a Viking with 5/16 X 18 quick release.

I accidentally put the Valhalla shaft on my Viking the other night, and was surprised to see that it fit perfectly.
And if it doesn't, a cue maker or repair person can bore out a couple of the top threads in a shaft insert to make it fit. I've had to do that in the past to put a Revo on a Viking quick release.
 
no listing for 5/16x18. i've got two cues with that and another with 5/16x14. Makes no difference. Why do people worry about this shit?
Sorry 5/16x 18 was left out because azbilliards survey only allows 10 items to vote on.
I want to know how many shafts I should pre-make for each joint in my shop.
 
Sorry 5/16x 18 was left out because azbilliards survey only allows 10 items to vote on.
I want to know how many shafts I should pre-make for each joint in my shop.
Reasonable goal.

But putting "other" in the survey can't help achieve that goal, putting the 18 pin would.

So...?

It's an extremely common pin vs "other". You can't stock "other".
 
5/16-18. Couple of Meuccis and a Huebler sneaky pete. The Huebler feels fantastic, it has a nylon threat insert in the shaft. But most people seem to be happy with what they have. I've never seen somebody telling me that his cue was bad (or good) because of the joint.
 
The only reasons I care about the joint of my cues:
- easy, smooth thread
- doesn't come loose
- interchangeable (I like most of my cues being the same joint)
- looks good
 
no listing for 5/16x18. i've got two cues with that and another with 5/16x14. Makes no difference. Why do people worry about this shit?
Why do people worry? It's important to turn nothing into something....
What zipper or snap is on your case?
Do have a left or right strap on your case?
Do you use a case or hand carry your cue into a pool room?
Does your cue have a name?
Do you have a name?
Do you smoke?
 
Why do people worry? It's important to turn nothing into something....
What zipper or snap is on your case?
Do have a left or right strap on your case?
Do you use a case or hand carry your cue into a pool room?
Does your cue have a name?
Do you have a name?
Do you smoke?
Because I'm bored:

1. JB uses Yee zippers most of the time.
2. Backpack straps on most of them that actually get used.
3. Case, I'm not a savage.
4. No, that's silly to me.
5. I forget
6. Only when on fire.
 
Why do people worry? It's important to turn nothing into something....
What zipper or snap is on your case?
Do have a left or right strap on your case?
Do you use a case or hand carry your cue into a pool room?
Does your cue have a name?
Do you have a name?
Do you smoke?
People worry to see how they (or their equipment) compare(s) to others.
I have black zippers on my Vincitore case. silver zippers on the black knockoff case.
Which witch?
I use a case.
My cases are both currently unnamed.
My first Frankenstick is op42, my second Frankenstick is Frankenstick.
Many.
Sometimes.
 
Back
Top