Recent content by prdryden

Tournament blue simonis , new brunswick superspeed cushion rubber , table aprons refinished in red mahogany. $600 cdn https://vancouver.craigslist.org/pml/tag/d/coquitlam-brunswick-gold-crown-pool/6832172462.html

Landam MA The location is actually Landam MA. (my mistake) I need a 7ft diamond smart table moved onto a truck Thursday, Sept 9th. Is there anyone that can do this? I believe it's located ground level but need to confirm.

Does anyone know of a mechanic that serves the Maryland Indiana areaN Thx in adv.

I went to look at a Gold Crown I today. The guy selling them has set one up (refinished) and has 3 more for sale. One thing I noticed was the slate drop at the pockets was angled similar to an antique table I once owned with the wooden corner inserts (similar angle that is). The playing surface...

soundproofing to quiet my table down I laid felt into the gutters with staples (makes them totally quiet and lined the middle trough with 1/8" thick x 8" wide clear plastic used for doorways (vertical see-thru slats in doorways) stapled in. That's as far as I got- a quick fix and no noise up to...

modified rail strip what exactly does the ridge (strip) on the back of the rails do? It's the one thing I didn't do to my dynamo.

dynamo mod I also just finished modifying my dynamo bar box. I did the shelf with 2 pieces of 3/8 thick lasercut steel (fit like a glove), epoxy, then bondo. (worked out well). I just took the picture and was about to post it when I saw your posting. I also put on the diamond k55 rubber on...

corner extensions added so I've added my extensions:used an adhesive remover then rubbing alcohol on all surfaces, mounted the slate on marble tile in all corners to get everything flush. Then epoxied it all together. It took about an hour and a half. in 24 hrs I'll know how well it holds.

dynamo conversion Glen, i do appreciate the feedback but I'm not tightening the pockets, just changing the angle slightly.I play on 7 footers so thats what I want to play at home on. where do I draw the line?-simonis, new rubber (existing was rock hard in places), pocket opening change. If the...

dynamo conversion they could be bevelled out (ground out) on the bottom.

dynamo conversion the only issue is whether or not they adhere with epoxy enough to lower the slate back in and not break off (epoxy has good shear strength about 2000psi so it should hold)

dynamo conversion ques The balls will clear the extension plates after dropping. I did take this into account). they extend back about 1-1/8 to 1-1/4

dynamo conversion thanks, the link was useful. I've attached pictures of the shelf extensions I had cut. (they will bring the perpendicular distance from cushion nose from 3/4 to about 1-7/8" or 2". My subrails are 17 degrees and I know I can get a nose height of 1-7/16" with that angle.. All I...

dynamo conversion I understand the ridgeback rails play harder and are convenient. I have, however, ordered rubber already, so returning it when it gets here is going to be costly. My mistake, I should have ordered them. Is the original question either too simple or difficult to answer?

subrail angle again, -what is ideal subrail angle for K55 rubber? (subrail height is 1 3/4"). Assuming the subrail is mounted perpendicular to the slate.