Search results

11+13+the 9ball upside down as a 6... Envoyé de mon iPhone en utilisant AzBilliards Forums

They just need to be cut to fit behind the facing. Envoyé de mon iPhone en utilisant AzBilliards Forums

How thick are the slates? Did you level the frame first? How many shims did you use to level the center slate. Tightening the screws with a pile of shims between the frame and the slate can crown it real bad. Hard to say just looking at your pics Envoyé de mon iPhone en utilisant AzBilliards...

That can't work in that case unless you drill the top of the rail or through the slate... my way takes less than a minute Envoyé de mon iPhone en utilisant AzBilliards Forums

If it's a captured nut this is what i do: cut the cloth, pull the rubber up just enough to see the nut in the cavity. Insert a hacksaw metal blade under the plate and spin the bolt. It'll cut itself on the blade and you can remove the nutplate without more drilling/cursing Envoyé de mon iPhone...

[emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23] Sent from my iPhone using AzBilliards Forums

Pm'd you [emoji6] Envoyé de mon iPhone en utilisant AzBilliards Forums

30" min from the slate. My advice to my customers is to measure from the ceiling to your eyes. That's what you need from the canopy to the bottom of the shade. Assemble on the floor so you don't have to work with the chain links above the table Envoyé de mon iPhone en utilisant AzBilliards Forums

I've installed a couple. The rails look like s**t Because you can see the rubber's color through the cloth Envoyé de mon iPhone en utilisant AzBilliards Forums

Are the side rails well aligned? Envoyé de mon iPhone en utilisant AzBilliards Forums

Knock off gold crown: The ball box have no bwick sign and the aprons should be on each side of the box Sent from my iPhone using AzBilliards Forums

What kind of balls do you have? Envoyé de mon iPhone en utilisant AzBilliards Forums

I had this up as a joke for a while Just hung this one today Sent from my iPhone using AzBilliards Forums

Does that program calculate where the cb is going if you add some english? Envoyé de mon iPhone en utilisant AzBilliards Forums

I'd work on the stance too. It looks like there is zero weight transfer to your front leg. Envoyé de mon iPhone en utilisant AzBilliards Forums

He doesn't need that ladder since he can climb on the pool table and wheel it in front of every shelf Envoyé de mon iPhone en utilisant AzBilliards Forums

Not really: Thinner cloth and heavier balls on carom tables is the reason they can travel further Envoyé de mon iPhone en utilisant AzBilliards Forums

5ft between the tables is good enough. Most pool halls have less than that. Envoyé de mon iPhone en utilisant AzBilliards Forums

Back to Brags question: 4.5+3.5+(3x5) will get you just a little tight. A 9 footer will be between 60" and 64" wide depending on the rails width (50" + twice 5"to 7") same goes for the 7 footer.. Envoyé de mon iPhone en utilisant AzBilliards Forums

I guess i've only worked on the early ones then. There's not many of them around here in Quebec. Thx for the info Envoyé de mon iPhone en utilisant AzBilliards Forums