Search results

What would be the real density of Juma, on their site it's quoted at 1.2g/cm3 and on BD site it's around 1.6g/cm3, I just want to know that for my personnal knowledge, and is it as strong as Hydex and Tomahack. I have Tomahack and I will order a lenght rod of Hydex 202, but some friends work...

Have you ever had problems with Isoplast and why hydex is superior quality, what reasons, I would have preferred the whitest material possible but I want quality too, for me it's for carbon tubes, for playing and not break, Thank you.

Same mechanical specifications for both, density and everything, I would have thought similar performances, Kim says that hydex is considerably superior, I want to order a 10 foot bar, I don't want to make a mistake!

This K66 is higher than the old one that was there before and it seems correct for the height of subrail that you have, in principle the K55 should reach 1 3/8'' very close, which would be too low, curious to see the K55, we will see what the great chief RKC will say about that, you're on the...

Ok, I see, good Thank You!

I didn't think either was close to being translucent, I'm trying to figure out which one is more white or less off white. translucent=permitting the passage of light

Hello, is the Isoplast 202 the same color than the Hydex 202 or wich one is more one the white side, Thank You!

You can post the result with your new piece of K66, it's always interesting! Photo!🤓

The best way before ordering your new cushions, you will be sure at 100%

Wow, I didn't know that one, the Diamond cushion noses are at 1 29/64'' that's it!, otherwise it would jump and the GCs at 1 27/64'' do they have problems, in my area we almost all have Black Crowns from Canada Billiards, so I don't often see Diamond and Brunswick.

You can calculate a week long, if you want to know the reality at his best, take 2 piece of cushion K66 and K55 and you will have the best. I can calculate by trigonometry anytime, I used that before the little programm, I make my carbon fiber profile myself and that include angles and radius...

Your pool table is not a CNC, the technical is not the reality on a pool table, If you don't know that it's because you are inexperimented, that's for sure

Anyway, when I have somethings to calculaste I use the little programm, fast and easy. https://www.calculator.net/right-triangle-calculator.html And .3 degrees is not enough accurate, it's certainly more accurate than your way, and I know that can reach .1 easily with my tools.

I don't need to calculate your things, that's not my way to do in these circumstances, do you think that you are the one and only one to know trigonometry!!:ROFLMAO:

Check, that's my angle finder and it's very accurate +/- 0.05 degrees, when I put it on the slate and on the rail bevel I have the perfect reality, not the technical calculation!

Ôk, I'm machinist and solid in mathematic, trigonometry...., just to know one point, how your rectangular angle is really at 90 degrees accurately, it's easy to miss a couple of degrees?

His measurements are bad then!

Yes, it's that I though, the way he measure the angle by trigonometry is not as accurate as a good angle finder, but what's the real profil cushion that he have now...??

Yes I know, I inversed the cushions in writing, what do you think that he have now K-66 or K-55, that's not clear from their measurements!

I deleted my message, I was wrong, K66 are 1/8 approx. higher than K55 and if your measure are good you would need K55, like I said higher with a piece of K55 that would be easy to figure that, Good Luck!