Search results

I don't trust your rules set-up concerning the angle =/- 2 degrees is just a bit, I just don't trust it. But anyway it seem that you need K-66, K-55 would be too much high.

K55 would be at 1 1/4'' with your rails, check this picture and your measurements 1 11/16'' at 23.5 degrees are probably wrong, K66 at these measurements would be at a bit more than 1 1/2''

Where do you live, in Jungle!🙃

Found these pictures, technical is technical but real try in live will give the real things.

Find a piece of cushion k55 and try it to see what it's all about, it's an easy way to compare.

USD

WX900 29inch Uniloc $175 Straight, I'm from Quebec.

7 feet have 2 on the RKC video in the link, I don't think that 8 feet can have 4 bolts by rails, not sure.

I will make sure not to disappoint you!☺️

I don't know why you say that, I explained that for me 5 bolts is a good quantity, 3 is not enough on no table in my opinion, too much distance between the bolts. Leveling is a completely different thing, at some point I will show here the best tool system to make the surface as flat as possible...

Each of us is entitled to our opinion and preferences, but when we see the Rasson tables which are mounted with excessively strong rails coated with resin phenolic and are bolted with 5 bolts, it gives a good example to follow. When I do work in metal, for example a trailer, I prefer to use...

This manufacturer decided to put 6, I don't know the solidity of their rails, but one thing is certain: it makes rails which vibrate less and which sit well on the slates. Wood remains a material that is not 100% stable, here our rails have all crooked a little over the years, they only have 3...

I did not find the video but i found a picture showing how many bolts used by rail, 6 bolts by rail, here i will add 2 more bolts for a total of 5 and some guys here think that's totally useless, I'll show them this photo.

The best way to install a cloth is to index it by lining it, that's for sure, find videos where installers work this way. Guys who don't line their cloth just can't have a perfectly balanced 2:1 setup and very tight, it's not hard to understand that. You speak here on this forum as if all the...

Reading you sounds like, a nursery school teacher talking to his little ones.

Without glueing the seam and Bondo, the joint will eventually break and you will have Bondo granules under your cloth a real bullshit.

I'm going to finish the jig that I started, it will also be useful for something else, I also have the idea of trying a table with the semi-circle of cushions filled with a hardwood dowel, I looked at it and the K55 MBS cushions that we received and the ones they sell here, and they are...

The little impact drill without clutch can tight to 120ft/lbs and more and just after 6 or 7 shocks that tight a lot more than a lot of stupid guys can think, the guy who replace the cloth here for the moment use it and he destroy everything with that, all the rails washers are now close to the...

Yes sure, but the jig is not finished yet, it's in construction, when it's functional I'm going to take several photos of it all. I do all the work on a drill press and not on a milling machine and I don't work full time on it, so it will take some time.

I started to make a very solid guide frame for a router, this guide will be used to straighten all the rails of our 21 tables and for other uses too. I built it in cold rolled flat bar of 4 x 1/2 inch, normally a single piece of 5 feet long costs around $100 and I got a great deal on...