I have to move a Gold Crown 3 tomorrow night. Does anyone know what tools I will need to accomplish this?
Thanks
Thanks
Tools needed to take apart GC3
- Thread starter poolnut7879
- Start date
A pair of pliers and a blowtorch...
15 lb sledge and a wench...
should break down real nice....
should break down real nice....
Nothing like some nice wenches!
To OP - the ask a mechanic section might have some more knowledgeable folks for this.
Sent from my SM-G900W8 using Tapatalk
I did. No replies.
Socket driver for the rail bolts.
Allen keys for the gullies.
Set of wrenches and screw drivers.
To take the rails down, you need to take out the gullies and irons first .
Taking out the ball box at the foot spot is the trickiest part imo.
I bought an old GC2 and that's how we knocked it down.
The slates were pinned together . Had to unbolt the end slates and pull them away from the middle one before totally lifting it ou.
The GC3's slates are not pinned together together afaik.
Allen keys for the gullies.
Set of wrenches and screw drivers.
To take the rails down, you need to take out the gullies and irons first .
Taking out the ball box at the foot spot is the trickiest part imo.
I bought an old GC2 and that's how we knocked it down.
The slates were pinned together . Had to unbolt the end slates and pull them away from the middle one before totally lifting it ou.
The GC3's slates are not pinned together together afaik.
That's because it's been asked at least 10 times, and 10 times explained in detail.....try using the search function please.