3/8 x 10 Live Threading

rhinobywilhite

rhinobywilhite

AzB Silver Member
Silver Member
Can anyone suggest a particular bit for live threading 3/8x10 for joint pins.

I looked in the search feature found a suggestion for the Micro 100 but no tool bit number.

I suppose there are other brands also.

Your suggestions would be appreciated. I have a Bosch Colt router.
 
  • Like
Reactions: JC
rhinobywilhite said:
Can anyone suggest a particular bit for live threading 3/8x10 for joint pins.

I looked in the search feature found a suggestion for the Micro 100 but no tool bit number.

I suppose there are other brands also.

Your suggestions would be appreciated. I have a Bosch Colt router.
Click to expand...
I bought one from another forum member, it made to Bob Dzurickys spesifications by onlinecarbide.com
 
JC said:
I would go with this if you can get the shipping down to postal flat rate box prices.

JC
Click to expand...

If you use the "will call for payment" check out payment method I can do $9 priority mail insured.
That is about half UPS rates and all quoted rates on the shopping cart are UPS.
 
I have been asked more details about the bit:

The shank is .250" and the neck is .125"
 
It's a single form thread mill or single profile thread mill, you can get them at MSC or other companies. Had to cut a bunch of AL plate for a client, with tapped holes. The prospect of hand-tapping was not pleasing. Easy though with a single form threadmill and some helical interpolation...
 
live tooling

Hello,

Try Harvey Tool, tool #981003 $67.50 plus shipping. I use this tool for flat bottom 3/8x 10 and 5/16x14 joints. When checking out the specs be sure the cutting depth or neck length is adequate.

Good Luck,

Joe
 
You must log in or register to reply here.
Back
Top