Sold 70's/80's era Brunswick Cue

Sold Item
j2pac

j2pac

Marital Slow Learner.
Staff member
Moderator
Gold Member
Silver Member
I have a 1970/80's era Brunswick cue available. The price is SOLD PENDING PAYMENT.
The specs are as follow.
The butt of the cue is 29" & weighs 14.0 oz, according to my scale. It is .844 at the joint, and 1.176 at the butt end of the cue.
The shaft is 4.6 oz, and is ~30" long, with a 12.75mm tip diameter. There is NO tip on the cue.
The shaft is NOT original to the cue, but was fitted to the original brass joint collar.
I believe the cue would be a fine player on it's own right, or could be converted, if desired.
Please try to respond with interest, in this thread.
Thank you for looking.
 

Attachments

  • 20211026_120810.jpg
    20211026_120810.jpg
    398.3 KB · Views: 1,047
  • 20211026_120830.jpg
    20211026_120830.jpg
    379.9 KB · Views: 1,063
  • 20211026_120814.jpg
    20211026_120814.jpg
    436.4 KB · Views: 1,011
  • 20211026_120822.jpg
    20211026_120822.jpg
    412.9 KB · Views: 984
  • 20211026_120847.jpg
    20211026_120847.jpg
    337.7 KB · Views: 1,035
Last edited:
j2pac said:
I have a 1970's era Brunswick cue available. The price is $145.00, shipped & insured within the lower 48 CONUS ONLY.
The specs are as follow.
The butt of the cue is 29" & weighs 14.0 oz, according to my scale. It is .844 at the joint, and 1.176 at the butt end of the cue.
The shaft is 4.6 oz, and is ~30" long, with a 12.75mm tip diameter. There is NO tip on the cue.
The shaft is NOT original to the cue, but was fitted to the original brass joint collar.
I believe the cue would be a fine player on it's own right, or could be converted, if desired.
Please try to respond with interest, in this thread.
Thank you for looking.
Click to expand...
Price reduction to $145.00 shipped and insured. Lower 48 CONUS ONLY.
 
Last edited:
j2pac said:
I have a 1970's era Brunswick cue available. The price is $145.00, shipped & insured within the lower 48 CONUS ONLY.
The specs are as follow.
The butt of the cue is 29" & weighs 14.0 oz, according to my scale. It is .844 at the joint, and 1.176 at the butt end of the cue.
The shaft is 4.6 oz, and is ~30" long, with a 12.75mm tip diameter. There is NO tip on the cue.
The shaft is NOT original to the cue, but was fitted to the original brass joint collar.
I believe the cue would be a fine player on it's own right, or could be converted, if desired.
Please try to respond with interest, in this thread.
Thank you for looking.
Click to expand...
Bump.....🇮🇹
 
That's a really nice full splice cue butt. I'm guessing Early 1980's? after a closer look two things really intrigue me about it. First, the butt diameter is on the thin side which is very desirable today, And am I wrong or is that old forest Brazilian Rosewood? It's just gorgeous. If so, that's super cool since that forest was depleted in the 1940's or there about. Not all the wood was used up then, but those trees are gone forever.
I also have a question. What joint pin does it have?
 
Last edited:
jayman said:
That's a really nice full splice cue butt. I'm guessing Early 1980's? after a closer look two things really intrigue me about it. First, the butt diameter is on the thin side which is very desirable today, And am I wrong or is that old forest Brazilian Rosewood? It's just gorgeous. If so, that's super cool since that forest was depleted in the 1940's or there about. Not all the wood was used up but those the trees were gone forever.
I also have a question. What joint pin does it have?
Click to expand...
I believe it is a 5/16-14.
 
I found this in the closet. Had forgotten that I even had it. $145.00 out the door.
😎
 
You must log in or register to reply here.
Back
Top