Hello, I have to thin out the herd so here is my 8 point full splice wrapless with veneers for sale. Blank is from Duc Lam and I was told by Jerry R that it was made from the Predator factory in Asia. Work was done by Carolina Cues. The cue was recently refinished by Eddie Cohen of Cohen Cues this Spring. (Received back from Eddie Cohen in May.) Cue was used for a few racks to make sure everything was okay. During the build of the cue there was some slight veneer separation, but it does not affect the playability of the cue. I did scratch the cue on the new finish but it can hardly be seen unless closely inspected. Any questions please feel free to pm. Satisfaction is guaranteed if the cue is not good upon inspection or upon the trying out of the cue I will refund your money!!!!!
Here are the specs.
-1 Shaft, 29 in, 3.9 oz, LBM ferrules, Everest tip, 12.5mm tip.with a pro taper, very slight taper roll.
-3/8X10 pin.
-Ivorine flat faced joint Black phenolic collars.
-Birdseye Maple forearm.
-Ebony 8 point splice with veneers of Natural, Green, Pink, Black from out to in.
-1 inch Delrin buttcap.
-Butt is 15.2 oz., 29 in.
-3X5 J&J case included and pictured.
I am looking for $400 the combo. Paypal is fine.
Thanks
Han.
Here are the specs.
-1 Shaft, 29 in, 3.9 oz, LBM ferrules, Everest tip, 12.5mm tip.with a pro taper, very slight taper roll.
-3/8X10 pin.
-Ivorine flat faced joint Black phenolic collars.
-Birdseye Maple forearm.
-Ebony 8 point splice with veneers of Natural, Green, Pink, Black from out to in.
-1 inch Delrin buttcap.
-Butt is 15.2 oz., 29 in.
-3X5 J&J case included and pictured.
I am looking for $400 the combo. Paypal is fine.
Thanks
Han.
Last edited: