90 degree v groove shaper cutter

patrickcues

patrickcues

AzB Silver Member
Silver Member
I am looking for a 90 degree V groove shaper cutter. I am looking for a 12 wing cutter with a 3/4" bore for my mill. Anyone know where I can get one?

Thanks!
 
Contacy any saw doctor company for the wood industry. They can make what you want and will stand behind what they make.
Neil
 
patrickcues said:
I am looking for a 90 degree V groove shaper cutter. I am looking for a 12 wing cutter with a 3/4" bore for my mill. Anyone know where I can get one?

Thanks!
Click to expand...

Here is a 2 1/4 " 12 tooth shank type for 102.95.

http://www.use-enco.com/CGI/INSRIT?PMAKA=319-1921&PMPXNO=19505331&PARTPG=INLMK32

If you want a arbor type, this one is a 3" 20 tooth with a 1" bore but you can use a collet so that it will fit a 3/4 arbor. It is 84.95.

http://www.use-enco.com/CGI/INSRIT?PMAKA=362-7640&PMPXNO=950739&PARTPG=INLMK32

Unless custom made, these are about as close as you will get. I use a 3 tooth carbide 90 deg. wood shaper cutter myself that I got from Grizzly. To make up for the fewer teeth I run my last pass slower than the rest. Have had no problems so far (about 5 years) and have never had to have sharpened. Here is a link to that one.

http://www.grizzly.com/products/Shaper-Cutter-90-V-Groove-3-4-Bore/C2087

Dick
 
Thanks Dick! I have been using the 3 wing cutter for years now. I run it into the chuck last week. So I figured that I would get a cutter with 12 or more wings on it. Thanks for the links !!!
 
You must log in or register to reply here.
Back
Top