Are these K55, K66, or U23

[notnilc20]

I read that
dimensional height=
K55 = 1 1/4"
K66 = 1 1/8"
U23 = 1"

and the top angle width = the same dimension of the height.

However, on my Valley Cougar coin op cushions the height is equal to 1 1/8" perfectly. which tells me these cushions are K66. But the dimensional height only = 1", which tells me U23. I guess i'll go with K66. Any help is appreciated.

 

[ROB.M]

valley

I read that
dimensional height=
K55 = 1 1/4"
K66 = 1 1/8"
U23 = 1"

and the top angle width = the same dimension of the height.

However, on my Valley Cougar coin op cushions the height is equal to 1 1/8" perfectly. which tells me these cushions are K66. But the dimensional height only = 1", which tells me U23. I guess i'll go with K66. Any help is appreciated.

-
-

-
-
--
-
-
Rob.M

 

[realkingcobra]

I read that
dimensional height=
K55 = 1 1/4"
K66 = 1 1/8"
U23 = 1"

and the top angle width = the same dimension of the height.

However, on my Valley Cougar coin op cushions the height is equal to 1 1/8" perfectly. which tells me these cushions are K66. But the dimensional height only = 1", which tells me U23. I guess i'll go with K66. Any help is appreciated.

It's simple if you just measure from the nose to the topside back of the cushion, across the top of the cushion is what I'm saying. Match that to your measurements....real simple.

Glen

 

[notnilc20]

The only numbers I found were inside the legs... with a date 12-05-89. written in marker. according to your scale these are K55....however, none of these cushions even come close to 1 1/4"......on my guide it says that U23 cushions have measurements of 1" or slightly over 1" and i'm getting these type of numbers...but still not really confident. I might have to make the drive to the billiard shop to do some comparisons.

 

[ROB.M]

cushions

Cushions can dry out and shrink over time, take the ball door off, look top center of opening on table for a small model number decal' easy to find if its there..
-
Rob.M

 

[Tbeaux]

I read that
dimensional height=
K55 = 1 1/4"
K66 = 1 1/8"
U23 = 1"

and the top angle width = the same dimension of the height.

However, on my Valley Cougar coin op cushions the height is equal to 1 1/8" perfectly. which tells me these cushions are K66. But the dimensional height only = 1", which tells me U23. I guess i'll go with K66. Any help is appreciated.

Muellers shows that k55= 1 5/16" x 1 1/4"
k66= 1 3/16" x 1 1/8"
u23= 1 1/8" x 1 1/16"