Best Jump/Break Deal of the Weekend....

krbsailing

krbsailing

AzB Silver Member
Silver Member
I have an X-Breaker (less than 2 years old) in very good used condition. This is a BEM model which has a few minor bumps and a small chip in the finish by the jump joint; and, the bottom of the bumper is missing -- nothing that would effect the functionality of this cue :wink:

Butt weighs 13.7 oz; jump handle is 4.4 oz; shaft is 4.2 oz; original 12.9mm ferrule/tip; balance point is approx 19.5" from the buttend.

100_4661.jpg

100_4670.jpg
100_4668.jpg

100_4672.jpg


last but not least the nick in the finish....

100_4673.jpg


SOLD :smile:
 
Last edited:
22.3 ounces??

What kind of tip?
X1, X2, or other?

Is the entire bumper missing? Or just part of the bumper?
 
okinawa77 said:
22.3 ounces??

What kind of tip?
X1, X2, or other?

Is the entire bumper missing? Or just part of the bumper?
Click to expand...

It would be 17.9 ounces. The weight of the butt should include the weight of the jump handle.

Joe
 
I think the cue weighs 17.9 (13.7 + 4.2). I think he just listed the jump handle weight separately (could be wrong though)
 
Assumption is the mother of all f*ck ups.
I prefer to get clarification from the seller.

17.9 oz would be a great weight for a jump/break cue. But I have come across some X-Breakers over 19 ounces.
 
okinawa77 said:
Assumption is the mother of all f*ck ups.
I prefer to get clarification from the seller.

17.9 oz would be a great weight for a jump/break cue. But I have come across some X-Breakers over 19 ounces.
Click to expand...

FYI. Krbsailing is my friend and you will not go wrong with a transaction with him. :ok:
 
Assumptions = Ass|U|me

Thanks for your support guys!

Your'e correct this is a great weight (17.7 oz to 18.1 oz) IMHO for a break cue ;)

The jump handle weighs 4.2 to 4.4 oz on my scale. The butt weighs 13.5 or 13.7 oz (on my scale :rolleyes:) which does include the weight of the jump handle. The shaft (just triple checked it) weighs 4.2 oz.

So, I've got a scale reading of from between 17.7 oz to 18.1 oz for the overall cue....let's call it 17.9 oz give or take :o

My apologies for any confusion here folks :sorry: I don't think the .4 oz is going to make any significant difference at this price point :cool:
 
krbsailing said:
Thanks for your support guys!

Your'e correct this is a great weight (17.7 oz to 18.1 oz) IMHO for a break cue ;)

The jump handle weighs 4.2 to 4.4 oz on my scale. The butt weighs 13.5 or 13.7 oz (on my scale :rolleyes:) which does include the weight of the jump handle. The shaft (just triple checked it) weighs 4.2 oz.

So, I've got a scale reading of from between 17.7 oz to 18.1 oz for the overall cue....let's call it 17.9 oz give or take :o

My apologies for any confusion here folks :sorry: I don't think the .4 oz is going to make any significant difference at this price point :cool:
Click to expand...

This is a great X1-Breaker. It should go quick at such a low price.

I have a couple of friends that have the same X1-Breaker, only theirs is a little heavier.

If it were in better condition, then I would jump all over it.
 
aw, too late... this would go great with my wrapless all-BEM mezz with white joint/buttcap :D

best of luck with it!
 
Cue is Sold!

Again, sorry for the confusion but, cue has been sold :smile:
 
Last edited:
You must log in or register to reply here.
Back
Top