Bridge holders

[poolcuemaster]

Did Diamond ever have any under table bridge holders for there 9 foot Pro tables? I would like to find a set for each side if anybody has any pm me please.--Leonard

 

[JimS]

I'm giving this a bump to find out what you mean. Muellers sells hooks that can be installed on either side and I'm betting you know that so what else is there? Curiosity is getting to me here.

 

[Dartman]

I'm giving this a bump to find out what you mean. Muellers sells hooks that can be installed on either side and I'm betting you know that so what else is there? Curiosity is getting to me here.

He may be looking for something like this -

 

[poolcuemaster]

That will work

He may be looking for something like this -

Did Diamonds ever come with bridge holders from the factory and were they similar? thanks again and still looking.--Leonard

 

[Dartman]

I can't answer about diamonds. Maybe RKC can. Consider you might me able to fabricate something from angle iron.

 

[AzDave]

Here are two options for you if you want to adapt Gold Crown bridge holders to your table:

1- TSP&B sent the following IM to my call for bridge holders: "I have either 1 or 2 of the Chrome plated racks that attach to the underside of the table and hold the bridge sticks. They were originally on a GC1. I would let them go for $20 for both or $10 if I've only got one left, plus shipping."

I went with new, but found him very helpful and a problem solver.

2- Your local Brunswick distributor sells *new* bridge and rack holders that can be used on your table. My distributor sells the "Bridge Rack" 51-203648-003 for $29 and the Rack for Triangle 51-203649-003 for $9.95.

Nothin' wrong with puttin' GC holders under your Diamond, eh? Bet you've already pulled a bridge or two from one of those.

Did Diamond ever have any under table bridge holders for there 9 foot Pro tables? I would like to find a set for each side if anybody has any pm me please.--Leonard

 

[rikdee]

GC-1 bridge racks

Here are two options for you if you want to adapt Gold Crown bridge holders to your table:

1- TSP&B sent the following IM to my call for bridge holders: "I have either 1 or 2 of the Chrome plated racks that attach to the underside of the table and hold the bridge sticks. They were originally on a GC1. I would let them go for $20 for both or $10 if I've only got one left, plus shipping."

I mounted GC-1 bridge racks on my Diamond Pro. I fabricated large wooden blocks ( 2 each side from 6 x 6 stock) that attach to the frame rail allowing the rack to present the bridge stick at the proper height off the floor. I stained the blocks to match the frame and painted the racks to match the table's cherry finish. Looks really cool, very sturdy and functional, and no better quality of bridge rack is to be found than those from the early GC's.