Cue ID help needed, please

[DWoods6354]

Hello fellow AZ'ers. I picked up this cue yesterday and would really appreciate some help in identifying it's maker.

The Butt weighes 15.4 oz, and has a laminated or diamondwood style butt sleeve. The forearm appears to be BEM with four Teak (?) points. Each point has two veneers, light blue and light green. There are 5 rings made of the same material as the butt sleeve.

It's a standard 58" cue with a 3/8X10 non-piloted joint pin. The joint is 0.810 inches in diameter and the end of the butt cap is 1.280. The cue is straight and hits very solid.

Any ideas?

Thanks in advance for any help you can provide.

 

[DWoods6354]

Cue I.D.

Over 80 hits and no ideas?

 

[Cue Guru]

No ideas but it looks interesting.

IS that old-school Cortland linen on there? (hard to tell in photo)

Also, I noted the weight bolt was installed with the wrong tool I guess- the slot is all chewed up... Maybe worked on by someone after it left the shop?

If it plays well and you feel you got a good deal on it, that's all that really matters.

But, I am also curious!