david cooksey
Registered
My ? is how do you turn this device, do you attach a crank handle to it or what. Also how much would you sale one for that will fit on a Taig carriage.
Cuesmith threading attachment
- Thread starter Baba
- Start date
I didn't add a crank handle to it. I just use the chuck to turn it. Of course you could add some kind of handle to it on the back end of the hollow shaft but it is not neccessary. If you thread a shaft you would need to mount a second chuck to it anyway. So you can turn it with that chuck.
As I wrote a couple posts before I won't sell it for the mentioned reason.
Michael
As I wrote a couple posts before I won't sell it for the mentioned reason.
Michael
Chuck
Would that Bison chuck fit the standard cue smith head stock. I have a Mid size cue smith 6 ft bed large boar head stock, I have a hard time drilling and tapping hard ferrule material, No matter how tight I secure the ferrule stock it tends to still spin in the jaws of my chuck. Can you share some info on your Bison chuck, Cost, where to get one, Does it fit right on or did you have to make some modifications to make it fit your cue smith. maybe Chris can add some info as well.. Thanks Guys. Love my cue smith to death but not to crazy about the chuck...
Would that Bison chuck fit the standard cue smith head stock. I have a Mid size cue smith 6 ft bed large boar head stock, I have a hard time drilling and tapping hard ferrule material, No matter how tight I secure the ferrule stock it tends to still spin in the jaws of my chuck. Can you share some info on your Bison chuck, Cost, where to get one, Does it fit right on or did you have to make some modifications to make it fit your cue smith. maybe Chris can add some info as well.. Thanks Guys. Love my cue smith to death but not to crazy about the chuck...
You are right the gripping power of the standard chuck is not the best. This bison chuck only fits onto a standard small bore headstock, no modification needed. I directly bought it from Bison in Poland and it's great. Looking at the box it came in I can see it can be bought at toolmex.
See here:
http://www.toolmex.com/Products/BrowseResults.aspx?CatID=1046&Parent=1588|595|1046
I couldn't find a Bison chuck or similar which could be mounted onto a big bore headstock. If someone could build such a chuck please let me know!
Michael
See here:
http://www.toolmex.com/Products/BrowseResults.aspx?CatID=1046&Parent=1588|595|1046
I couldn't find a Bison chuck or similar which could be mounted onto a big bore headstock. If someone could build such a chuck please let me know!
Michael
If the material is spinning in the jaws of the chuck, wrap a small piece of leather around your work piece and most of the time that will secure the work piece good enough for me so it doesn't spin.
david cooksey
Registered
How much will you sale one of these setups for!
Dave
Dave
yes it would be reasonable for me....take one...
