Custom cues + Predator Revo compatibility?

[Harsh]

Looking for some guidance. I want a custom cue butt (Josey, Gilbert, Heath Outlaw, Nitti, Pierce, etc.) that I can pair with a Predator Revo shaft, while still using the original maple shaft.

Questions:

Do Predator Revos usually fit these makers’ pins (radial, 3/8x10, etc.) straight out of the box?

If not, is it more common to have the butt adjusted or the Revo fabricated to fit?

Any feedback from players who run a Revo on one of these customs — how does it compare in balance/play to the stock maple shaft?

Are there other builders you’d recommend who are known to pair especially well with a Revo?


Trying to build something I can swap between CF and wood without issues. Any advice from experience would be appreciated.

 

[Kim Bye]

Revo comes in all kinds of threads. It's about .842" at the joint and the weight is right around 4oz, so it weights the same as a normal maple shaft.
If you want a good flush fint, whatever cuemaker you choose needs to have .840" is joint collar diameter.
Why not buy a carbon fibre shaft from the maker?

 

[Harsh]

Revo comes in all kinds of threads. It's about .842" at the joint and the weight is right around 4oz, so it weights the same as a normal maple shaft.
If you want a good flush fint, whatever cuemaker you choose needs to have .840" is joint collar diameter.
Why not buy a carbon fibre shaft from the maker?

Most likely buy one already completed off of j&j, eBay, etc...