Digiball yes or no??

I haven't heard anyone talk about a unique advantage this would bring:

I don't have space for a pool table in my home, but I can modify my dining room table to the height and texture of a pool table allowing me to hit a cue ball off of it into a catch. I could make a practice rail if need be and have setup several accuracy measurement exercises.

Using a digiball would close a feedback loop for training without having a pool table. That could be huge for my scenario and leverage many hours that I can practice, but can't get to a table, potentially increasing the improvement in my play over the current trajectory.
 
I haven't heard anyone talk about a unique advantage this would bring:

I don't have space for a pool table in my home, but I can modify my dining room table to the height and texture of a pool table allowing me to hit a cue ball off of it into a catch. I could make a practice rail if need be and have setup several accuracy measurement exercises.

Using a digiball would close a feedback loop for training without having a pool table. That could be huge for my scenario and leverage many hours that I can practice, but can't get to a table, potentially increasing the improvement in my play over the current trajectory.
Replace the dining room table with a pool table and put a piece of plywood on top when it's time to eat.
 
I haven't heard anyone talk about a unique advantage this would bring:

I don't have space for a pool table in my home, but I can modify my dining room table to the height and texture of a pool table allowing me to hit a cue ball off of it into a catch. I could make a practice rail if need be and have setup several accuracy measurement exercises.

Using a digiball would close a feedback loop for training without having a pool table. That could be huge for my scenario and leverage many hours that I can practice, but can't get to a table, potentially increasing the improvement in my play over the current trajectory.
This idea is in fact written down in my notebook. I have a sketch of a table-top ball catcher with cloth attached to it, specifically so people without a table can practice their tip precision at home. I remember when I was learning how to play I would hit balls into a pillow to try to practice my straightness.

But you don't really need cloth if you can get the ball to stay still with a hole-punch reinforcement on a wooden table.

It is definitely a useful application of the product.
 
I haven't heard anyone talk about a unique advantage this would bring:

I don't have space for a pool table in my home, but I can modify my dining room table to the height and texture of a pool table allowing me to hit a cue ball off of it into a catch. I could make a practice rail if need be and have setup several accuracy measurement exercises.

Using a digiball would close a feedback loop for training without having a pool table. That could be huge for my scenario and leverage many hours that I can practice, but can't get to a table, potentially increasing the improvement in my play over the current trajectory.
Wood does not roll like slate…….I don’t think it would be reliable.
 
This idea is in fact written down in my notebook. I have a sketch of a table-top ball catcher with cloth attached to it, specifically so people without a table can practice their tip precision at home. I remember when I was learning how to play I would hit balls into a pillow to try to practice my straightness.

But you don't really need cloth if you can get the ball to stay still with a hole-punch reinforcement on a wooden table.

It is definitely a useful application of the product.
Do people actually do this??😉 Must really love this game.
 
If I understand it correctly and the system shows you an image of where you hit the cb, then it is something a club should have. Pretty sure it would be an eye opener for some people. It's certainly easier to see than watching the cb after contact. Can it be combined with one of these gyroscope thingies that measure cue position and accelleration?
 
I hooked myself pretty bigtime last night and decided that the two rail kick was my best option.

Now I have never used a Digiball in my life, but knew what spot to hit on the cue ball & because of that the correct portion to hit on the rail.

Longish story short the object ball went in the pocket.

Why did the object ball go in - did I just get lucky?

I will reiterate my position on the subject. If a player doesn't already possess the knowledge of where the cue ball is supposed to go with a certain strike on the clock, the Digiball is not going to help a great deal. Unless said player has infinite time on his / her hands to play trial and error.

Even then that is no guarantee.
 
I hooked myself pretty bigtime last night and decided that the two rail kick was my best option.

Now I have never used a Digiball in my life, but knew what spot to hit on the cue ball & because of that the correct portion to hit on the rail.

Longish story short the object ball went in the pocket.

Why did the object ball go in - did I just get lucky?

I will reiterate my position on the subject. If a player doesn't already possess the knowledge of where the cue ball is supposed to go with a certain strike on the clock, the Digiball is not going to help a great deal. Unless said player has infinite time on his / her hands to play trial and error.

Even then that is no guarantee.
The purpose of the DigiBall isn’t to teach you where to hit the cue ball with a certain strike. Its purpose is to show you how close you are coming to hitting the ball to where you want to with your tip.

Are you as accurate as you think you are? Are you executing what you thought about in your pre shot routine? Are you even thinking during your pre shot routine? Can you play the same shot 10 times and hit the cue ball within half a millimeter every time? Are you using all available space of your cueable area, aka. Full canvas?

Hitting the cue ball accurately is the only thing you as a player really have control over. Why wouldn’t you want to optimize that skill?

The DigiBall helps separate the table knowledge solution outcome from actual execution. Divide and conquer while learning, put everything together when performing.
 
The purpose of the DigiBall isn’t to teach you where to hit the cue ball with a certain strike. Its purpose is to show you how close you are coming to hitting the ball to where you want to with your tip.
If a player doesn't know where to hit the cue ball with the tip in the first place how is the DigiBall going to help them?

If the player misses the object ball and gives up ball in hand they obviously hit the cue ball in the incorrect spot Don't need a fancy techno gadget to figure that out.

Hell if a player is going for a break out off a made object ball and doesn't know for sure where to hit the cue ball to get that break out what good is knowing where they hit the cue ball?
Are you as accurate as you think you are? Are you executing what you thought about in your pre shot routine? Are you even thinking during your pre shot routine?
I will tell you another story. Couple weeks ago I played in a local regional tournament. Was hill hill with my opponent. I think he had two object balls on the table, I had one & both of course the 8 ball. He played me safe a couple times. First one I damn near kicked in. He then had to play me safe again. I damn near kicked this one in with a two rail shot. Never used the jump cue once, never gave up ball in hand. He now had nowhere to play safe & had to take on a shot which he missed badly. Well long story short, that was the end of him.

So yeah I am as accurate as I think I am!! Within my knowledge base of course.
Can you play the same shot 10 times and hit the cue ball within half a millimeter every time? Are you using all available space of your cueable area, aka. Full canvas?
You are looking at this completely the wrong way. I don't have to hit the cue ball within half a millimeter every time. I have to hit my object ball every time.
Hitting the cue ball accurately is the only thing you as a player really have control over. Why wouldn’t you want to optimize that skill?

The DigiBall helps separate the table knowledge solution outcome from actual execution. Divide and conquer while learning, put everything together when performing.
Nathan, if you have one without the other you have nothing.

The DigiBall is absolutely nothing without the knowledge of how a particular shot needs to be played. In conjunction with that knowledge a player very well could use the DigiBall with success.

What you have to understand is it's not necessary.
 
If a player doesn't know where to hit the cue ball with the tip in the first place how is the DigiBall going to help them?

If the player misses the object ball and gives up ball in hand they obviously hit the cue ball in the incorrect spot Don't need a fancy techno gadget to figure that out.

Hell if a player is going for a break out off a made object ball and doesn't know for sure where to hit the cue ball to get that break out what good is knowing where they hit the cue ball?

I will tell you another story. Couple weeks ago I played in a local regional tournament. Was hill hill with my opponent. I think he had two object balls on the table, I had one & both of course the 8 ball. He played me safe a couple times. First one I damn near kicked in. He then had to play me safe again. I damn near kicked this one in with a two rail shot. Never used the jump cue once, never gave up ball in hand. He now had nowhere to play safe & had to take on a shot which he missed badly. Well long story short, that was the end of him.

So yeah I am as accurate as I think I am!! Within my knowledge base of course.

You are looking at this completely the wrong way. I don't have to hit the cue ball within half a millimeter every time. I have to hit my object ball every time.

Nathan, if you have one without the other you have nothing.

The DigiBall is absolutely nothing without the knowledge of how a particular shot needs to be played. In conjunction with that knowledge a player very well could use the DigiBall with success.

What you have to understand is it's not necessary.

This is a pretty decent presentation of why the information given by the digiball is not likely to assist a player, and may be detrimental, if for no other reason than just waiting time.

I have said it before, but one of the best things a developing player can do is just hit the cueball around the table with different amounts of spin. Shoot straight across the table and try to make the cueball go in the side pocket. Start a half diamond below the pocket, work up to as far as you can go. Learn two and three rail kicks at different speeds.

Doing all of this will teach how much spin is needed, it will also show how accurate tip placement is. It will do all of this with instant feedback and no translation of data.

If you are the dining-room-table guy, yeah, maybe this will help if you use it on a real table to figure out where you need to hit the ball for various shots, then use it to build consistency and confidence.

Until the digiball will tell you where and how hard to hit the ball for the desired outcome, it is useless data, except for center ball hits .. We all know where to use those. But then, the only way we know is from having done it enough to recognize it...
 
It will do all of this with instant feedback and no translation of data…
There is no translation of data. You literally see a picture of a cue ball with a tip outline on it. It’s a digital version of a Rempe ball, which have been around for decades, only much better.

I don’t remember you being a tester, so you may be reacting to your own imagination. For more info please visit www.digiball.net ☺️
 
@DeeDeeCues
thanks for the support
at least i know i am not the only one
i give nate credit for the work and knowledge involved in creating digicue blue and digiball
and i hope he can retire on it
but the digicue has some use IMO but still doesnt tell you how to fix the errors
and the digiball how does it help to know you hit 2.1234 tips from center instead of
2.13456 tips from center
where the cue ball landed tells you if you hit the right spot and need more or less english
again IMO
 
There is no translation of data. You literally see a picture of a cue ball with a tip outline on it. It’s a digital version of a Rempe ball, which have been around for decades, only much better.

I don’t remember you being a tester, so you may be reacting to your own imagination. For more info please visit www.digiball.net ☺️

Of course there is translation of data. You shoot the shot, you watch the result (that is instantaneous data), then you look at what the device says you did, then you translate that back to what you saw when shooting.

I hit a rempe ball twice and decided it was unnecessary, also. As far as being better, that is only if your device is accurate, which the engineer in me says will require third party validation and repeat calibration.

I wasn't a tester. I also didn't test the butt vibrator sleeve, even though a friend had one that I could have borrowed.

I'll put this to you another way: If I am able to make spin do what I want, what use is this to me? If the spin does what I want it to, and I am a half hour earlier or later than I thought, how does that help me if I'm not an instructor? Until a person knows the difference in results between hitting at 4 o'clock vs. 5 o'clock, knowing where they are hitting is not useful. Once they know those differences, they have learned what 4 o'clock and 5 o'clock are...even if they are different than my 4 or 5.

It's a nifty little toy and took a lot of work and expertise to build, I applaud your efforts, but with every product, one needs to ask whether it is actually valuable to them. It isn't to me because I see it as time wasted to tell me something I don't and never have cared about.

Now, if I were writing a book and wanted to have diagrams of where to hit, I would absolutely want this. That is the missing piece to your product, you need to dig up Grady's corpse and have him write about a thousand of his shots out using the digiball...then you are onto something.
 
  • Like
Reactions: bbb
@DeeDeeCues
thanks for the support
at least i know i am not the only one
i give nate credit for the work and knowledge involved in creating digicue blue and digiball
and i hope he can retire on it
but the digicue has some use IMO but still doesnt tell you how to fix the errors
and the digiball how does it help to know you hit 2.1234 tips from center instead of
2.13456 tips from center
where the cue ball landed tells you if you hit the right spot and need more or less english
again IMO

The value would be in communicating with a beginning player and helping them see the clock face with confidence. When one stops looking at it as a solo training device and starts looking at it as an instructive communications device, it makes sense. To a full time instructor, this should be worth a couple thousand, easy. To a beginning player, maybe it's worth something. To those who have any grasp on spin, I just don't see it.
 
  • Like
Reactions: bbb
@DeeDeeCues
thanks for the support
at least i know i am not the only one
i give nate credit for the work and knowledge involved in creating digicue blue and digiball
and i hope he can retire on it
but the digicue has some use IMO but still doesnt tell you how to fix the errors
and the digiball how does it help to know you hit 2.1234 tips from center instead of
2.13456 tips from center
where the cue ball landed tells you if you hit the right spot and need more or less english
again IMO
It's just an instrument. Scanning electron microscopes don't tell you what to look for or what to make of it. All the space telescopes too but there's shit in and out there.

Faux quantifying some difficulty you may or may not have doesn't invalidate the tool or its window. Diminishing returns doesn't mean no returns. Pushing at your margins is how you improve.
 
Back
Top