There have been discussions here on that and other oil based finishes, search for gun stock finish, linseed, BLO, tung oil, penetrating oil, etc. That doesn't create a clear coat so is different than what is typically used for cues, although I've seen discussions of tung oil built up on the surface but never tried it on anything.
Finishes other than CA
- Thread starter Lizardking
- Start date
There have been discussions here on that and other oil based finishes, search for gun stock finish, linseed, BLO, tung oil, penetrating oil, etc. That doesn't create a clear coat so is different than what is typically used for cues, although I've seen discussions of tung oil built up on the surface but never tried it on anything.
Solarez is great, I use it on my cues, BUT is smelly and contains Stryrene which is not good for us. Use plenty of ventilation. I have played with a waterbased gloss from System 3 called pennant topside clear gloss with activator. Hard finish especially with the activator, but have had trouble getting it to shine like glass. There are videos but haven't had time to work on it lately.
click on these for Solarez and Pennant info
click on these for Solarez and Pennant info
Thanks for the link. Do you use a sealer before you apply the finish? If so, what sealer do you use?
Cheers
I use this to one of my older custom cue. Also tried other finishing stuff being discussed here. If you own an older cue and want a 'semi' antic patina try this. It takes about 7 coats spread on a 2 week period but you will be amazed by the result.
no oil finish on cues..... it gets sticky
Don't fool yourself into thinking Brite Tone and especially Solarez are safe to breath their fumes. You need ventilation. I suggest epoxy base coat with Kraft Kote clock finish top coat.