First dozen to respond... Outsville M/S Tip Give Away!!!!

The Renfro

The Renfro

Outsville.com
Silver Member
Recently we have been hard at work to create an ultra soft tip for a custom cue-maker and the research has yielded some very interesting results... I will not sell any of the ultra-softs or name the cue-maker but the processing has yeilded what I think will be our Super Soft and Medium Soft offerings...

I still need to test the Super Soft further but the Medium Soft is ready for feedback.. It sits between our soft and medium...

I will send the first 12 responders, willing to install them and give feedback, medium/softs out on Monday...

In the response I would like to know what cue they were installed on or more importantly what shaft and what diameter ferrule....

Chris
 
I am in need of a new tip. I would love to try one.

Going on my custom Jim Baxter, OB-1 shaft with a 12.75 mm ferrule.
 
Last edited:
Post

I'll be happy to try it on my 12.75mm huebler w/standard maple huebler shaft.
Thanks again.




Rob.M
 
Last edited:
Very grateful

I would love to try one on my Predator 314-2 shaft with 12.5 ferrule diameter. This is very generous of you sir!
 
I have a Predator Z2 Shaft that I would love to try your medium soft. I enjoy doing drills so I believe I could give you some decent feedback.

Thanks!
 
If some one backs out for some reason I would put it on a huebler with original shaft that has 13mms tip on it. I'll be pulling of a kumui clear soft.
 
I would love to try one .I am still waiting for the delivery of my sampler pack. If any are available let me know.
 
if you go past 12 people to try them out id like to try them out and will give a review
12.75mm ob+ (the new ob1) on a chris nitti cue ivory joint radial pin
 
First!!! Woohoo!!!!

Diveney hustlah, lbm and ivory ferrules.

Outsville takin care of the azb...:bow-down::smilewinkgrin:
 
The Renfro said:
Recently we have been hard at work to create an ultra soft tip for a custom cue-maker and the research has yielded some very interesting results... I will not sell any of the ultra-softs or name the cue-maker but the processing has yeilded what I think will be our Super Soft and Medium Soft offerings...

I still need to test the Super Soft further but the Medium Soft is ready for feedback.. It sits between our soft and medium...

I will send the first 12 responders, willing to install them and give feedback, medium/softs out on Monday...

In the response I would like to know what cue they were installed on or more importantly what shaft and what diameter ferrule....

Chris
Click to expand...

Damn did I miss it :eek:
Do you have a timeline on the Solids?
 
Last edited:
You must log in or register to reply here.
Back
Top