FS: a bunch of spare shafts

Bamacues

Bamacues

AzB Gold Member
Gold Member
Silver Member
I am doing some housecleaning. I have 12 spare shafts that I am letting go at very good prices. Prices include shipping in the US. If you want more than 1 shaft, remove $10 from the price of the extra shafts above 1. The cues with "very slight taper roll" have the very smallest of light variance when rolled. The 2 Barnhart shafts are actually 3/8x10, and not radial as the sticker has on it...my boo-boo.

1. Samsara, 5/16x18 piloted, 4.2oz, 12.6mm, .850", LBM, straight...SOLD...krbsailing

2. Tiger-x, 5/16x14 piloted, 3.9oz, 12.2mm, .843", ivory, straight...SOLD...froznShooter

3. Gilbert OB-1, 3/8x10, 3.7oz, 12.6mm, .846", buckhorn, 29.5", straight...xxx..SOLD...mtorre

4. Espiritu B, 5/16x14 piloted, 3.9oz, 13mm, .840", LBM, slight roll...SOLD...Wade

5. Espiritu B, 5/16x14 piloted, 3.9oz, 12.5mm, .840", LBM, slight roll...SOLD...Wade

6. Lambros, 3/8x10 ultra, 3.4oz, 11mm, .846", LBM, straight...Reduced....$50 delivered in the US

7. Lambros, 3/8x10 ultra, 3.9oz, 12.5mm, .846", LBM, straight, xxx...SOLD...Poolcuemaster

8. Barnhart, 3/8x10, 4.1oz, 13mm, .835", LBM, very slight TapRoll...SOLD...Stickbndr

9. Barnhart, 3/8x10, 3.9oz, 13mm, .835", LBM, very slight TapRoll...SOLD...Stickbndr

10. Joe Baker J/B, 3/8x10, 3.9oz, 13.2mm, .850", phenolic combo, straight...xxx...SOLD...mtorre

11. McDermott, 3/8x10, 3.7oz, 12.8mm, .840", LBM, very slight TapRoll...xxx...SOLD...Poolcuemaster

12. Kaiser, 3/8x11, 4.1oz, 13mm, .844", LBM, slight taper roll...SOLD

Joe

Shafts--multiple10-3-2009.jpg
[/IMG]
 
Last edited:
get i get the total price for the gilbert ob-1 and the baker break/jump shaft? shipped
 
Last edited:
hey joe, do you take paypal??? if so, can i get your info so i can send the fund right now, thanks
manuel
 
I'll take #7 Lambros if still available and the mcdermott #11 for $100 shipped so send me paypal info Joe--Leonard
 
Last edited:
mtorre and poolcuemaster....PMs sent with paypal info. If payment is made tonight, they will ship tomorrow vie USPS Priority Mail.

Thanks,
Joe
 
No pm recieved yet Joe with the paypal address, I'm ready when you send address. going to work for 3-4 hours now will check in when I get off.--Leonard
 
Only 4 shafts remain.

The two 3/8x10 Barnhart shafts are exceptional shafts with very nice grain. They are pretty much perfectly straight with about the thickness of a piece of paper light variation when rolled. They spin perfect on the lathe.

The Lambros 11mm shaft is some great wood. Although 11mm, it plays quite stiff. If you like a Z shaft or play snooker, this shaft would be perfect. The collar could be faced to mate to a standard flatfaced 3/8x10 pin shaft.

The 3/8x11 Kaiser shaft is new, never hit a ball. It would make a great back-up shaft.

Joe
 
Last edited:
On the Barnharts....the stickers say radial, and you have 3/8 x 10 in post. Which are they?
Thanks!
Jon
 
jemerson23 said:
On the Barnharts....the stickers say radial, and you have 3/8 x 10 in post. Which are they?
Thanks!
Jon
Click to expand...

That was a boo boo on my part. They are 3/8x10. Cory's standard joint is a radial, but these were made with a 3/8x10 thread to fit a cue I used to have...they are VERY nice shafts.

Joe
 
You must log in or register to reply here.
Back
Top