I had mentioned in a previous post that I was contemplating selling this lathe and I decided to just get it listed. This is a great lathe and is in immaculate condition but is in the way for a larger metal lathe.
The Headstock is only about two months old and Ive used it sparingly since I received it due to a lot of traveling for work. The previous headstock had some issues so I just ordered the new motor and headstock setup direct from Chris.
I will include a few house cue blanks and forearm/handle wood to get you started as well.
SOLDSOLDSOLD
Included with lathe (I may have missed a few things but all is included in photos)
New style Hightower Headstock, Motor, and Controller (Reversing Switch Installed)
1/2" Tailstock
Taper Bar
Shaft Steady Rest
House Cue Steady Rest
Steady Rest with Deluxe Chuck
Porter Cable Router with straight router bit
Vertical Router mount from MidAmerica
Pinion Gear and Rack auto feed
Larger A/C Motor for coring
Wrapping Motor with foot pedal
A2Z Quick Change tool holder with 2 Tool Holders
1 Compound Cross Slide
5 Extra Cross Slides
3 Tool Posts
Machining mount on Cross slide
Extra Belt for motor
Digital straight edge ruler
1" Brand New Indicator from Little Machine Shop
New Dead Center
4 - 3/8-10 Pins
1 - 3/8-10 Tap
The Headstock is only about two months old and Ive used it sparingly since I received it due to a lot of traveling for work. The previous headstock had some issues so I just ordered the new motor and headstock setup direct from Chris.
I will include a few house cue blanks and forearm/handle wood to get you started as well.
SOLDSOLDSOLD
Included with lathe (I may have missed a few things but all is included in photos)
New style Hightower Headstock, Motor, and Controller (Reversing Switch Installed)
1/2" Tailstock
Taper Bar
Shaft Steady Rest
House Cue Steady Rest
Steady Rest with Deluxe Chuck
Porter Cable Router with straight router bit
Vertical Router mount from MidAmerica
Pinion Gear and Rack auto feed
Larger A/C Motor for coring
Wrapping Motor with foot pedal
A2Z Quick Change tool holder with 2 Tool Holders
1 Compound Cross Slide
5 Extra Cross Slides
3 Tool Posts
Machining mount on Cross slide
Extra Belt for motor
Digital straight edge ruler
1" Brand New Indicator from Little Machine Shop
New Dead Center
4 - 3/8-10 Pins
1 - 3/8-10 Tap
Last edited: