FS - Mcdaniel shaft

jaycast16

AzB Silver Member
Silver Member
i got this along with my schon and i thought it is better to sell it since it just sitting in my case.it is used but in good condition..rolls straight and no dings.

tip-12.4mm with moori tip installed
collar-.826
NOT FOR SALE ANYMORE




benta na talga.jpg

benta mo na.jpg
 
Last edited:
I have seen this shaft in person and Jaycast16 is a great guy to deal with..even he has no ITRADER in this forum but i can vouch for him...no worries dealing with him. Goodluck on your sell :thumbup:
 
Mcdaniel ????

Are you 100 % sure that this is a Bill Mcdaniel Shaft ???? It does not look like a Mcdaniel shaft to me, IMO the collar & insert are different and It looks to be a shaft for a Schon or some other fitted 5/16 x 14 Shaft.
Just looking to help you out in case it's not a Mcdaniel and save you the hassle of selling a differrent item than advertised. If somebody buys this as a Mcdaniel shaft but it's not, it Will Not fit on the Mcdaniel cue.

Hope this helps
Please let me know what you find out


Thanks..........Paul
 
no McDaniel Shaft

Are you 100 % sure that this is a Bill Mcdaniel Shaft ???? It does not look like a Mcdaniel shaft to me, IMO the collar & insert are different and It looks to be a shaft for a Schon or some other fitted 5/16 x 14 Shaft.
Just looking to help you out in case it's not a Mcdaniel and save you the hassle of selling a differrent item than advertised. If somebody buys this as a Mcdaniel shaft but it's not, it Will Not fit on the Mcdaniel cue.

Hope this helps
Please let me know what you find out


Thanks..........Paul

Hi Paul,

I was thinking the same:thumbup:
Ralf
 
Are you 100 % sure that this is a Bill Mcdaniel Shaft ???? It does not look like a Mcdaniel shaft to me, IMO the collar & insert are different and It looks to be a shaft for a Schon or some other fitted 5/16 x 14 Shaft.
Just looking to help you out in case it's not a Mcdaniel and save you the hassle of selling a differrent item than advertised. If somebody buys this as a Mcdaniel shaft but it's not, it Will Not fit on the Mcdaniel cue.

Hope this helps
Please let me know what you find out

Thanks..........Paul

hi paul,
thanks for your concern.i actually got this from my friend.i'm suppose to get a schon shaft from him but it was too thin and i didn't like it. so,he gave the shaft of his mcdaniel cue instead since he doesn't care using schon shaft on his mcdaniel butt.i am %100 sure it is mcdaniel shaft.i think i didn't do a great job on the picture but i'll try to post more pictures so you can see the difference from the schon shaft.

you can also ask The Beginner(jun) about this shaft because we were together when i got this.once again thanks for the concern..

regards,
jaypee
 
Hi Ralf and Paul

How are you guys?...the previous owner of the shaft told Jaycast that it was a Mcdaniel shaft that was taken via trade as well...the original owner of the shaft owns a Mcdaniel cue and he no longer used an extra shaft which he switched to a regular shaft...I was there when jaycast and the previous owner made a deal via trade and he mentioned that it was a Mcd shaft...it fits with schon cues but it smaller on the joint ...jaycast and I only took the words from the original owner. We are not an expert on custom shaft..but if you guys said so that its not a Mcd we both apologize for the mistake. and thank you for clearing it up...

My question is how can we compare the different of mcd shaft vs regular shaft?
 
Mcdaniel Shaft

I don't no the exact specs off the top of my head, but I was told it involves the internal threads of Bill Mcdaniel made shafts that makes them different and not the same as Schon and many other makers with a version of a 5/16 x 14 shaft.
I will give Tommy aka Hangemhigh a shout and see if he will be kind enough to comment on this.

Again, I have dealt with this situation in the past and I am just trying to help out this seller in the case of maybe a mistaken identity with the shaft that is for sale.


Thanks............Paul
 
Hi Jun Buddy, ask Tommy HEM him will you told exactly what is the different.
http://forums.azbilliards.com/showthread.php?t=136653
Ralf


Pm Sent to Tommy,...thanks alot for your help my friend :)...Jaycast and I will measure the joint collar and the insert and will post pictures ASAP..thanks again for your help guys...reps for you and Paul :)

my friend jaycast is not trying to give wrong info about the shaft he was told it was a mcd shaft so he took that word from original owner...jaycast is not an expert on custom shaft that made for custom cues either...but we will compare the size of the joint shaft to his R12 and post it here :)..
 
sorry but that is not a mcdaniel shaft. i've had 8 of them and seen more, they were all considerably different from this one.
 
sorry but that is not a mcdaniel shaft. i've had 8 of them and seen more, they were all considerably different from this one.

Ced,

You might be right and others too...but as i said on my previous post that Jaypee and I only took the words from Ed Reyes which is the original owner of the shaft...if its not a mcd shaft then JP has to accept it the fact that its not a mcd shaft and move on...but thanks for your input though....but did you received your searing already? ..lol.
 
you guys are probably right..i am not really an expert to mcdaniel cue and i actually never seen any so i can't really tell the difference.if you guys think this is not a mcdaniel shaft then i won't bother selling it anymore.if somebody made a mistake that this is a mcdaniel shaft,i also made a mistake so i don't think i will allow another individual to have same mistake.i'll just keep it with me.

i would like to apologize to everyone for this and at the same time would like to thank you all for the help.i'll make sure i learn a lesson from this.i the future if i would like to sell something here i will ask for your opinions first.Thanks a lot guys and have a wonderful weekend!
 
Back
Top