Fullsplice Blank lot + Rosewood & Maple Squares Sale

Cue Crazy

AzB Silver Member
Silver Member
SOLD!!!!!- I have more of these Blanks then I need and Can use the money for Christmas, so I would like to sell them in a lot. First off There are 4 veneered rosewood into Birdseye Maple Blanks. Each Blank has different color veneers. These are not made By Prather, Davis, or anyone like that, so please don't expect them to be perfect, but For the Low cost they would be good for someone that wants some practice, and something a bit more colorful then a non veneer bar conversion. Expect them to have run out, because as most blanks do, almost all of them did when I first received them, but these are over sized, so there should be plenty of room to work with (3 of them are over 1 inch at the joints, and the other comes in at just under that), They are 29-1/2" long. They have been hanging In My shop for a year or 2 since I got them, and I have not cherry picked them, I just grabbed 4 of them to put in this lot. So any issues or run out are the same as what I would and have dealt with when I do a conversion from them. They are nice looking blanks for the money though, as can be seen in the pictures. I think they sell for about $95 a piece.

Also included are 4 squares, 2 maple Sq's to get good handles from, and 2 rosewood Sq's that are rough cut (I sanded one side of each on My belt sander just to give an idea of what they look like when smooth) All 4 squares are 1.5" Sq or larger, and 18.5" or longer. Should be able to build 2 more cues from these.


First buyer to make contact Via PM and make payment gets them, but I reserve the right to sell to someone with good feedback, I may be down playing the quality of these some, but I want to be clear that I do not intend to give any refunds, as I will be using the money to spend on My daughter for the holidays. I did not make these blanks, and buyer gets what I received, so please, not that I would fault you, but If your the really picky type then Please don't bother. I have built cues from these same blanks that turned out fine. I have seen a lot worse quality of these blanks then what I'm selling here (actually these look very good in comparison to others I have seen, and as I mentioned above they are over sized with room to work with) Get em here at a discount.:smile: If The buyer of these would like another blank, then I may could spare another one for a extra $50.

I have some seconds stuff that I will throw in for free, will post a picture below.

Thanks Greg
 

Attachments

  • azcueblanklot4.jpg
    azcueblanklot4.jpg
    101.5 KB · Views: 738
  • azcueblanklot5.jpg
    azcueblanklot5.jpg
    104 KB · Views: 741
  • azcueblanklot2.jpg
    azcueblanklot2.jpg
    99.2 KB · Views: 733
Last edited:
The buyer of the above will receive this lot for free. This is some stuff I bought on ebay years ago.

There are 3 short blanks, and a piece of billet. The short blanks are old, and I have no Idea who made them, they seem like seconds quality, but may be usable to someone, I built a cue from of them back in 2005 and it was My personal player for a while.

There's also a piece of butt size billet that has over 8" of usable length. I don't know if the indexing was off when they made them or what but one of the spaces between slots is slightly wider then the others.

Then there's just some small stuff, 5/16-18 pin with 3 brass shaft inserts, and one set of rings, 2 for the butt sleeve, and 3 for the joint and 2 shafts.

Again this is free for the buyer of the above. I think I paid between 25-35 a piece for the short blanks, and like 25 for the billet and this is what I received.

Thanks Greg
 

Attachments

  • azcueblanklot3.jpg
    azcueblanklot3.jpg
    100.9 KB · Views: 718
Sure wish I did PayPal. If you still have them on monday I can send a postal Money order, but I don't have much hope they will last that long!

Larry
 
Larry, if you pay me, I'll send him the Paypal. Let me know.

Although....I'm tempted myself! haha.
 
Greg, I sent you a PM about payment. Check it when you get a chance and we can figure out the details. Thanks!
 
Yep, Sorry guys, Larry and john got the last 2 that I'm willing to part with right now. Repair has slowed down for me as It usually does this time of year, so I was just trying to get some extra funds to help buy gifts for my little girl.

Thank to Everyone for all the inquiries:smile:,

Greg
 
SOLD!!!!! THANKS!!!!!I have 3 more of these blanks for sale (Pictured Below). On 2 of them the points line up close to each other using the center holes in there now, probably under 1/8 of each other, but one blank is closer then the other, and although 1 is real close, they are not dead perfect, so the buyer may want to try to get them closer depending on how picky they are. The joints on these 2 are around 0.880 and 0890., and the butt sides are around 1.090 to 1.100. When I run them between centers in the lathe, they have just a slight bit of bump in the middle. Nothing too bad, Just some slight movement that has taken place since They have been hanging, and It should cut out easily.

The 3rd blank in this group has points that are off a good bit, although less then 1/2" from highest to lowest. The joint diameter on this one is well over 0.900, and the butt end is about 1.145 to 1.150, and the center hole at the joint has been filled with CA, so It will need a new center hole drilled into It.

I'll throw in (1) 5/16-18 joint pin, and (2) brass inserts to help the winner get started, if they want them.

Same deal as Before-



If I get quick interest as I did before, then First buyer to make contact Via PM and make payment within 30 minutes of contact gets them, but I reserve the right to sell to someone with good feedback, or the second bidder, and so on, should payment by the first buyer to PM Me not be sent within the specified amount of time. I need the money right now, and want a quick smooth sale on these. That is the only reason I am even selling. I could easily finish converting the 2 blanks that are closest to size and sell each of them as complete cues for a lot more, but unfortunately I don't have enough time for that right now.

I may be down playing the quality of these some, but I want to be clear that I do not intend to give any refunds. I did not make these blanks, and buyer gets what I received, so please, not that I would fault you, but If your the really picky type then Please don't bother. I have built cues from these same blanks that turned out fine. I'm not sure if anyone still has them available for sale or not. I have seen that the source that had them for $95 a piece, and that I had mentioned before is currently sold out of all of them. These are absolutely the last of these I will be selling. I only have 2 blanks left after this, and They will be converted to cues for customers of mine.

My apologies for the over sized pictures, My editing software will let me crop the pics, but I can't figure out how to reduce the frame size with It. My old software had a feature that let me do that. This Kodak software does not seem to have that.

Thanks, Greg
 

Attachments

  • 2ndblanksforsale2.jpg
    2ndblanksforsale2.jpg
    100.2 KB · Views: 290
  • 2ndblanksforsale3.jpg
    2ndblanksforsale3.jpg
    96.6 KB · Views: 267
Last edited:
Back
Top