Help Identify Cue Please

jayman said:
its an 80's mali model # 500.

Jayman.

Jayman does it again! That's exactly what it is.

Chris

Ps. Jay we need to save that Joint picture - I didn't know they used the pointed pin and flat shaft insert, but I've seen several of these now.
 
Last edited:
Hay Jay!

They were built to Brunswicks specifications I believe.
Thank You,
Nick :)
 
Last edited:
Man! I always forget about Mali's & Rich's!!! And Ricco is so off the wall, who can remember he did old-school stuff with all that bling he does?!
 
jkmarshall_cues said:
ANY IDEAS WHAT THIS CUE IS???

P2150123.jpg

P2150124.jpg

P2150125.jpg

P2150126.jpg

P2150127.jpg

P2150129.jpg

The cue is certainly a Mali, but I have to disagree with Jayman, it was not made in the 80's it was made in the 1970's. The cues model number is 500 and they were distributed by Palmer Billiard Corp for Mali. The cues came with different colored rings in the butt, some Red, some Blue, some Green, and some White Pearl. Below are the photo's of the catalog and the original price sheet.
Notice the color of the cues wrap also matches the color of Pearl in the cues butt.

list2.jpg

Cue 2.jpg

cue.jpg

List.jpg

Enjoy
 
Last edited:
The cue is certainly a Mali, but I have to disagree with Jayman, it was not made in the 80's it was made in the 1970's. The cues model number is 500 and they were distributed by Palmer Billiard Corp for Mali. The cues came with different colored rings in the butt, some Red, some Blue, some Green, and some White Pearl. Below are the photo's of the catalog and the original price sheet.
Notice the color of the cues wrap also matches the color of Pearl in the cues butt.

The one I found it in is a 1980.

Jayman.
 
jayman said:
The cue is certainly a Mali, but I have to disagree with Jayman, it was not made in the 80's it was made in the 1970's. The cues model number is 500 and they were distributed by Palmer Billiard Corp for Mali. The cues came with different colored rings in the butt, some Red, some Blue, some Green, and some White Pearl. Below are the photo's of the catalog and the original price sheet.
Notice the color of the cues wrap also matches the color of Pearl in the cues butt.

The one I found it in is a 1980.

Jayman.

Mine is from 1976-1977, I am uncertain but they may have continued to make the cue under a different model number. But the cue pictured is certainly the older one, you can tell by the pin, in the late 1970's very early 80's they were no longer using a pointed pin.

Either way it is a nice old cue!!!
 
Last edited:
manwon said:
Mine is from 1976-1977, I am uncertain but they may have continued to make the cue under a different model number. But the cue pictured is certainly the older one, you can tell by the pin, in the late 1970's very early 80's they were no longer using a pointed pin.

Either way it is a nice old cue!!!

Thanks for clearing up the sharp pin issue. Somebody must have been selling that pin. I've seen it on other cues too. At the time Viking was supplying parts, so was Palmer. Do you know who was making that screw?

Also... Mali also did make some flat faced koints with a 5/16 X 18 pin and a nylon shaft insert. That particular joint took on a Huebler look too - just to add to the confusion.


Chris
 
TATE said:
Thanks for clearing up the sharp pin issue. Somebody must have been selling that pin. I've seen it on other cues too. At the time Viking was supplying parts, so was Palmer. Do you know who was making that screw?

Also... Mali also did make some flat faced koints with a 5/16 X 18 pin and a nylon shaft insert. That particular joint took on a Huebler look too - just to add to the confusion.


Chris

To add to the confusion a little more Mali cues made in the 1960's were marked with a Sticker on the Forearm. They looked allot like Rich cues and other like cues from that time frame. If the label is gone many go by identified as a Rich or even a Brunswick.

To add more confusion, most cues with a Nylon insert in the shaft of coarse are attributed to Paul Huebler because it became his trade mark. But the idea originated when Paul Huebler and Bob Meucci were working together. In many late 1960 cues you will find a Nylon insert in the shaft, and a 5 1/6-18 pin, if the pin is none pointed or round on the end and Brass like later Huebler pins it is most likely a Meucci / Huebler cue.

These can be very interesting because they will take on designs that are mixed with later Meucci / Heubler Influences.

Hope this helps!~
 
Back
Top