Need help identifying this cue, piloted 5/16x14 pin with piloted joint.flat edge butt cap with round bumper that is secured using a flathead screw into the weight bolt, plain linen black wrap. Looks like an old Mali, thinking its a production cue. Having problems loading more than one pic, thanks for help in advance.
Help identifying cue
- Thread starter qfans
- Start date
Without even reading the description, just the overall
Appearance,
I would guess to Late 1990's Mali. '99' Series or 'M' Series
Majesty Series Cues, the Mali came off very easily compared to the earlier MALI silkscreened or whatever application technique was used.
Also, Bumper and Butt-Cap can be misleading if any damage was repaired.
Hope this helps,
mike 'acedonkeyace' kennedy:thumbup:
Appearance,
I would guess to Late 1990's Mali. '99' Series or 'M' Series
Majesty Series Cues, the Mali came off very easily compared to the earlier MALI silkscreened or whatever application technique was used.
Also, Bumper and Butt-Cap can be misleading if any damage was repaired.
Hope this helps,
mike 'acedonkeyace' kennedy:thumbup:
I had a Mali identical to that but it was green
agree
I agree it could be a number of cues from that picture, but to me it looks like a Ray Shuler
cue.
If we had a picture of the joint we would no for sure if it was one of Rays cues or not.
I agree it could be a number of cues from that picture, but to me it looks like a Ray Shuler
cue.
If we had a picture of the joint we would no for sure if it was one of Rays cues or not.
My first thought was a Schuler as well but need to see the pin.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
cue
Mali - it has a Mali bumper...
Mali - it has a Mali bumper...
Mali cue
Not sure if they have changed over the production runs. The Mali that had just come thru has a bumper with no hole and is only 3/4 in overall height.
I have had to make several bumpers for cues that with hard to find replacements , so now I'm always trying to take notes when I can.
My studies find different.
Hope this helps.
Rob.M
Not sure if they have changed over the production runs. The Mali that had just come thru has a bumper with no hole and is only 3/4 in overall height.
I have had to make several bumpers for cues that with hard to find replacements , so now I'm always trying to take notes when I can.
My studies find different.
Hope this helps.
Rob.M
Last edited:
You picked up on the short joint collar. :thumbup:
I honestly don't want to guess on this one. But the short joint collar, plus the 14 pin, and the overall look....you could be right.
Nice.
.