I need your help with a project!

Snapshot9

Snapshot9

son of 3 leg 1 eye dog ..
Silver Member
I am working on something for Pool, and I need your help.

I need exterior measurements and shape of cases for:
(cases can be any shape, square or oval, etc., just
please specify what shape when quoting measurements).

I need more than one measurement for each type of case,
as different types of cases, same butt/shaft qty, might have different
outside measurements.

Basically, I am trying to get a range of outside measurements for
the following butt/shaft quantity cases (leather and vinyl hard cases).

2 x 4 case
3 x 5 case
3 x 6 case
3 x 7 case
4 x 8 case

Thank you .... This is for a developing product for the Pool industry.
 
hope this helps

OK Scott here are my cases:
Justis 3x6 32 1/2 x 6 x 4 1/2

Its George 2x4 33 x 4 3/4 x 2 3/8

Its George 1x2 33 x 3 3/8 x 2 1/8

Porper 1x1 32 x 3 x 2 1/4

Now these numbers are only the exterior length and width, I didnt measure the pockets but will if you like. I would say all these cases fit into the oval category except for the Its Georges they are more of a stretched oval but Im sure you are familiar with all these cases. Let me know if you need anything else.
 
Whittens

2 x 4, 34 H x 5.5 W x 2.75 D (Distance when PUT FLAT against Wall to Front of Case Top) add + 1.5 Pocket Depth

3 x 6, 34 H x 5.5 W x 4.0 D (Distance when PUT FLAT against Wall to Front of Case Top) add + 1.5 Pocket Depth

:cool:
 
Hope what your working on costs less then 24.95 FOB DESTINATION..... :D
 
You must log in or register to reply here.
Back
Top