I bought this several years back from some guy who bought it from some guy. It had been used in a wood shop, as the filter was covered in saw dust. I replaced that and put a cord on it. It's been working flawlessly ever since. I'm selling it because I bought a bigger one.
It will need to be dismantled in order to get it down from my rafters. It's not a big deal. That's how it got up there. Only the motor and pump need be removed.
5HP single phase Baldor and will work with a 30amp breaker. At least it will with my power(think I ran 10 gauge stranded through my conduit). The thing to do, if not already installed, is run a new circuit on a new breaker. You COULD share it with your dryer, but I doubt it could handle both loads as a compressor(single phase), when starting pulls a LOT of amps. It already has the correct wire and plug. In fact, I might have another receptacle, box, and cover here. The whole thing isn't as daunting as I made it sound. Currently "detuned" to 90 PSI, but that is adjustable by turning a nut. It will easily make the 175PSI it was designed for. I dropped it to increase the longevity.
It's horizontal, so could be put outside under an awning. I didn't go that route because it was in such nice condition and figured I might sell it one day.
It's been running in my garage for several years on a 220 single phase 30 amp circuit
I'll deliver this thing within a couple hundred miles of Ventura and help you get it set up. I'll even do the wiring for free. . 50 cents a mile with a 100.00 min. When you consider the labor and time involved, it's more than fair.
If you insist on saving money I could probably put it into my truck in pieces, otherwise the kneeling trailer I use for this sort of thing is about 100.00(last time I rented it) a day. I'd deliver it for 50 cents a mile with a 100.00 min. I will drop it off at YRC, if you want it shipped, for free. Figure around 300.00 to Texas and 600.00 to NY. I doubt you'll find better rates. Those numbers are pickup from YRC terminal. They'll load it onto your truck for no charge.
You can come check it out if I know you from here or the pool world. I'm not a big fan of having people over to my shop unless I know them or they are customers. Regardless, I'll need to be paid a 50% deposit if I'm delivering it and 100% if it gets shipped.
If you need a personal reference from somebody fairly well known, then you could call Jerry Matchin(Baby Huey) at his place most Friday and Saturday nights and ask about Fish. 805-641-2020. That's his business phone and yes, I have his personal but I'm not giving that one out. You could call Jerry McWorter as well. 805-648-2225. He's in Japan right now though.
It was built in 1988, but you'd never guess that unless you knew they changed the paint job.
1000.00
It will need to be dismantled in order to get it down from my rafters. It's not a big deal. That's how it got up there. Only the motor and pump need be removed.
5HP single phase Baldor and will work with a 30amp breaker. At least it will with my power(think I ran 10 gauge stranded through my conduit). The thing to do, if not already installed, is run a new circuit on a new breaker. You COULD share it with your dryer, but I doubt it could handle both loads as a compressor(single phase), when starting pulls a LOT of amps. It already has the correct wire and plug. In fact, I might have another receptacle, box, and cover here. The whole thing isn't as daunting as I made it sound. Currently "detuned" to 90 PSI, but that is adjustable by turning a nut. It will easily make the 175PSI it was designed for. I dropped it to increase the longevity.
It's horizontal, so could be put outside under an awning. I didn't go that route because it was in such nice condition and figured I might sell it one day.
It's been running in my garage for several years on a 220 single phase 30 amp circuit
I'll deliver this thing within a couple hundred miles of Ventura and help you get it set up. I'll even do the wiring for free. . 50 cents a mile with a 100.00 min. When you consider the labor and time involved, it's more than fair.
If you insist on saving money I could probably put it into my truck in pieces, otherwise the kneeling trailer I use for this sort of thing is about 100.00(last time I rented it) a day. I'd deliver it for 50 cents a mile with a 100.00 min. I will drop it off at YRC, if you want it shipped, for free. Figure around 300.00 to Texas and 600.00 to NY. I doubt you'll find better rates. Those numbers are pickup from YRC terminal. They'll load it onto your truck for no charge.
You can come check it out if I know you from here or the pool world. I'm not a big fan of having people over to my shop unless I know them or they are customers. Regardless, I'll need to be paid a 50% deposit if I'm delivering it and 100% if it gets shipped.
If you need a personal reference from somebody fairly well known, then you could call Jerry Matchin(Baby Huey) at his place most Friday and Saturday nights and ask about Fish. 805-641-2020. That's his business phone and yes, I have his personal but I'm not giving that one out. You could call Jerry McWorter as well. 805-648-2225. He's in Japan right now though.
It was built in 1988, but you'd never guess that unless you knew they changed the paint job.
1000.00
Attachments
Last edited:
