Inverted metal pin

[Jonathan Smith]

I have a cue that needs a new shaft. Has anyone seen or know where one can get a replacement?

 

[Tommy-D]

I can say with almost 100% certainty unless you find another shaft you can "scavenge" the part from that you will NOT find a suitable replacement.

On the other hand,ANY decent machinist can make that part in less than an hour,but it will certainly cost more than the cue is worth. Tommy D.

 

[Jonathan Smith]

Thanks Tommy

 

[mortuarymike-nv]

Shaft parts

What is wrong with using the hardware off the old shaft ?

 

[KJ Cues]

Regardless of what the cue is, if you like it and want hang on to it a while
you should know that there is an option that prevents this issue from recurring.
Have the jnt converted to 3/8x10.
Since you're already getting a new shaft, have a 10-pin installed in the handle/butt
and you'll never be lost for a shaft again. I'd replace the jnt collar as well.

HTHs, KJ

 

[tsp&b]

here is a listing for a donor cue. There are several more where I found this... Just a thought. Alot of these style of cues have Ramin Wood shafts. If you really like that cue I would suggest that you have a new shaft made of maple.

http://www.ebay.com/itm/Vintage-2-P...8&pid=100005&rk=1&rkt=6&sd=111649975200&rt=nc