I am looking for a Jerry R cue! Any available?
Jerry R
- Thread starter Terry Aeschliman
- Start date
Thanks Troy
Jerry was an old school cue maker. I’m not just referring to the type & popularity of the designs he made.
He was very hands on in his approach to cue making & took his time to get the details of the design right.
I enjoyed our many conversations that covered a range of topics but cue making and designs were popular.
In hindsight, I procrastinated on ordering a 360 design we had kicked around & just ran out of calendar time.
He was very hands on in his approach to cue making & took his time to get the details of the design right.
I enjoyed our many conversations that covered a range of topics but cue making and designs were popular.
In hindsight, I procrastinated on ordering a 360 design we had kicked around & just ran out of calendar time.
I picked up a Titlist conversion by Jerry, looks very much like a Bushka. I would love to find a 360, not sure if I could afford it though.
bump
Couple of scammers but no good leads on a Jerry R
I have one
Attachments
I was fortunate to have met Jerry in Sanford Florida last Wenesday and have decided to upgrade my search
for one of his 360's. Any available ?????
for one of his 360's. Any available ?????
Mr. Joshua
Registered
I have one of Scott Gracio's 360s if you're interested. Not a Jerry R but some would say better, and he's building cues again. But may not be able to ship to you depending on where you are.
Last edited:
I got a couple I'd let go
Jerry -R- Rauenzahn Cues
Selling 2 Jerry -R- cues Cue 1 is 30'' butt Ebony points and butt with curly maple handle Radial pin joint with good stuff for the joint No Shaft There is a couple nicks in the joint, see pictures. I do not have a scale to weigh the cues, Cue 1 is about 16.25 oz, Break/ Jump cue is about 16oz...
forums.azbilliards.com
I bought Jerry's personal player when I met him in Sanford Florida. Still looking for one of his 360's
Let’s get a look at that bad boy?
First time I heard any cue maker was maybe better than Jerry R. @ 360 designs.
Obviously this might be true but the challenge with either is locating a pool cue.
Mr. Joshua
Registered
Scott's in the process of changing over his equipment to make some 360s now. Everything on mine lines up perfectly, and he makes the tribute shaft. He may use carbon fiber in the shaft this time around. Adding a couple of pictures.
Last edited:
If you are still looking I picked up a Jerry R cue at the VNEA tournament last week. It's a Hoppe style 4 point 4 veneer ivory joint & hoppe ring. Pig skin leather wrap. 1 shaft, radial pin.
Cue needs a refinish. I'd sell as is for $1000, planning on sending it this week to be refinished & new shaft then will be selling for $ 2400.
If interested let me know and I will send you some pics.