Joel Weinstock Fs

shotmaker

Banned
I have this Joel Weinstock cue that is juast sitting in the case collecting dust.
i got it in a trade sometime ago and really have too many cues to make much use of this one.
It have Hondurus Rosewood forearm and butt lseeve, with apurple heart handle. It has bar bell inlays of ivory and micarta that are approx 6 inches from the butt sleeve to into the handle and 9 inches from the handle into the forearm.
It has 2 shafts that both have the old micarta ferrules, a micarta joint, a 3/8-11 brass joint pin
This cue rolls straight both assembeld and apart and has one small bump in the handle near the butt sleeve that is not quite thru the finish, other than that this cue is beautiful with no other blemishes.

i'm in need to free up some cash and this one is just sitting here collecting dust.

I'm going to offer this sold plus shipping anywhere in the con. USA.

I've tried to accurately describe this and have pictured everthing as best as I could, The bump in the handle is also pictured here.
 

Attachments

  • Picture 006.jpg
    Picture 006.jpg
    45 KB · Views: 370
  • Picture 007.jpg
    Picture 007.jpg
    41.7 KB · Views: 268
  • Picture 009.jpg
    Picture 009.jpg
    46.7 KB · Views: 224
  • Picture 011.jpg
    Picture 011.jpg
    45.3 KB · Views: 241
Last edited:
Auctions Are taking over this For Sale Thread

Just a little bumPage, for a GOOD BUY ON THIS CUE. It's beginning to look like the auctions are covering up anything for sale here!
 
Please provide specs--cue length, weight of butt and shafts, tip diameters, and tip types. Thanks.
 
Cue specs

I weighed the butt on a mail scale it weighs 16.6 ounces one shaft weighs 3.6 the other 3,8
Both shafts measure approxiamtely 29.25 the butt measures approximately29.75 excluding the rubber bumper.
the balance point is approximately 18 inches from the butt end
I have no way of measuring the shaft diameters, and rather not say something then be wrong.

I love the way the micarta hits, real sweet and crisp.
 
Thanks for the info. Speaking only for myself, and meaning no disrespect, I would never consider buying a cue without knowing the tip diameter. The previous owner could have had them turned down to 12 mm--unacceptable to me--and I wouldn't know until it was too late. If you have trouble getting offers on this you may want to seek out someone with a micrometer to get those measured. IMHO only, of course.
 
I understand your concern, but i'm not looking for an offer at this price it's a giveaway. This cue cost in excess of $1000 to make. If it doesn't sell for this price, i may trade it for a nice 4 point jensen with veneers, that has been offerd but if not I'll just pack it away until the market comes back. If someone wants a really nice cue dirt cheap , here it is, I'm not pushing it, it's at rockbottom.

brechbt said:
Thanks for the info. Speaking only for myself, and meaning no disrespect, I would never consider buying a cue without knowing the tip diameter. The previous owner could have had them turned down to 12 mm--unacceptable to me--and I wouldn't know until it was too late. If you have trouble getting offers on this you may want to seek out someone with a micrometer to get those measured. IMHO only, of course.
 
Q>?

what is the part of the cue that is made of micarta and what part is Ivory??


Im a little confuse. Thank you!


M
 
shotmaker said:
I understand your concern, but i'm not looking for an offer at this price it's a giveaway. This cue cost in excess of $1000 to make. If it doesn't sell for this price, i may trade it for a nice 4 point jensen with veneers, that has been offerd but if not I'll just pack it away until the market comes back. If someone wants a really nice cue dirt cheap , here it is, I'm not pushing it, it's at rockbottom.

why dont u trade for the jensen and sell it for 700+ instead of selling the weinstock for 250? i ask because i am interested in jensens lol
 
Last edited:
mycustomcues said:
what is the part of the cue that is made of micarta and what part is Ivory??


Im a little confuse. Thank you!


M

The buttcap is ivory and the ends of the barbells are ivory, there are three deco rings that have ivory dashes,they are located on the shaft , at the joiint, and just above the buttcap.

The ferrules and the joint are micarta along with the longer parts of the barbells, which are also micarta
Thanks
 
Last edited:
I went ahead and bought the jensen, before it disappeared, he decided he needed to get rid of it in ahurry, so i got it cheap, It's real nice, and not for sale.


Danktrees said:
why dont u trade for the jensen and sell it for 700+ instead of selling the weinstock for 250? i ask because i am interested in jensens lol
 
Hi Shotmaker,

Consider the cue sold! I guess you are right..at this price..the shafts alone are worth that..especially from Joel.

Regards,
Duc.
 
There may be someone ahead of you! I had three emails prior to your last one, which didn't state that you wanted the cue. i'll get back to you just as soon as i hear from these others.
 
Hi, no problem...I sent the last email saying I take it at list price plus shipping. Please let me know either way.

Regards,
Duc.
 
Weinstock Cue

If above deal does not happen for any reason I would like to buy this cue and will pay $250 plus shipping any way you want it.

Just in case.

Thanks
 
Back
Top